Digital Drilling-Based Assessment of Rock Anisotropy: A New Index Integrating Drilling-Derived Apparent Friction Angle and Unit Grinding Energy
Accurate characterization of rock anisotropy is crucial for underground engineering stability assessment. In this study, multi-directional drilling tests were performed on sandy mudstone and argillaceous sandstone, with real-time monitoring of feed force (F), torque (M), rotational speed (n), power (P), drilling velocity (v), and depth (h). Drilling-derived apparent friction angles (φ) in different directions were estimated using a force-equilibrium-based model. Based on drill bit geometry, an energy balance model for hollow drilling was developed, and a unit grinding energy (ηe) was derived. A preliminary drilling-derived anisotropy index (Bφ−ηe), based on the coefficient of variation (CV) and integrating φ and ηe, was proposed. Results show a strong linear correlation between thrust force and torque, both exhibiting a two-stage increase with drilling depth. For the tested drilling orientations, the anisotropy determined using the proposed method decreases in the following order: sandy mudstone 1, sandy mudstone 2, argillaceous sandstone 2, and argillaceous sandstone 1. The proposed index provides a preliminary basis for evaluating directional variations in rock anisotropy.