Electrochemical Characteristics of TiO2 Reinforced Al-Zn-Mg Alloy for Marine Applications

Optimizing SiC Content for Enhanced Corrosion Resistance in Al-5%Cu Alloys Fabricated by Powder Metallurgy

Aluminum–copper (Al–Cu) alloys reinforced with silicon carbide (SiC) are attractive for marine applications, yet their corrosion behavior is reported inconsistently in the literature: SiC has been described as both a physical barrier and a galvanic catalyst, depending on its content and distribution. To clarify this, t...

Electrochemical and immersion corrosion behaviour of TNZT-xSi-yMn/Fe/Zn composites for biomedical applications

The present study investigates the effects of low-cost alloying elements (Si, Mn, Fe, and Zn) on the corrosion behaviour, ion release, and surface characteristics of β-type Ti-35Nb-7Zr-4Ta (TNZT) composites for biomedical implant applications. TNZT-xSi-y (Mn/Fe/Zn) composites, where x = 0.5, 0.75, and 1.0 wt.% and y...

Experimental investigations on the corrosion behavior of Al–Mg/B4C composites synthesized via powder metallurgy

The goal of this project was to investigate the microstructure, hardness as well as corrosion behavior of Al - 4% Mg metal matrix composites containing boron carbide (B₄C) particles at different weight fractions (3, 6, and 9 wt.%). Composites were produced through powder metallurgy by compacting, sintering and characte...

Study on the corrosion resistance of Ni-PTFE/Ni-LA composite plating by two-step electrodeposition

Corrosion Behaviour of Ca3(PO4)2-Reinforced in Ti-15Zr Composite Fabricated by Powder Metallurgy in Simulated Physiological Fluids

Hybrid Surface Engineering of AA5083 with Cerium Oxide Through Hydrothermal Treatment and Friction Stir Processing