Skip to content
Preprint

Event-Time Hybrid Optimal Control for Robotic Table Tennis Serves

Aug 2026 · 0 citations · 27 references
Computer Science

Abstract

Robotic table tennis serves require high ball velocity and spin while respecting the robot's kinodynamic limits. Unlike rally strokes, a valid serve must also bounce on the server's side and clear the net, yielding a hybrid system with nonlinear flight and impact dynamics. We formulate spin-controlled serve generation as an event-time \ac{OCP} that optimizes the racket impact velocity and orientation together with the bounce, net-crossing, and landing times, enabling direct enforcement at phase boundaries of table-bounce and net-clearance constraints. The racket velocity and orientation are then converted into a complete kinodynamically feasible motion through a second \ac{OCP} enforcing joint-position, velocity, and torque limits. We evaluate the method numerically and on a KUKA Agilus robot. Compared with a fixed-step formulation with root localization, the proposed event-time formulation reduces the median solve time by a factor of 4.1 while maintaining comparable landing accuracy, spin accuracy, and serve validity. Real-robot experiments demonstrate controlled placement and topspin, backspin, and sidespin serves, with a mean landing error of $13.1 \pm 7.3$~cm and spin rates up to 30~rps. These results show that event-time optimal control efficiently generates physically valid, kinodynamically feasible serves while accounting for nonlinear aerodynamic and impact effects.

View source

Similar papers

Open access 2026

Lyapunov-Certified Parameter Search and Terrain-Adaptive Feedback Control for Legged Locomotion Systems

: Stable high-speed locomotion of legged robotic platforms depends on gait parameters that are usually tuned by hand, with no guarantee that the resulting cycle is stable or efficient. This paper builds a hybrid dynamical model of the center-of-mass trajectory using a spring-loaded inverted pendulum abstraction, with s...

Jia-Lin Li · 0 citations
Sep 2026

Steering Through Contact: A Finite-Support Motion Model for Single-Track Center-Articulated Robots

A finite-support quadratic model (FSQ) is proposed for single-track, center-articulated vehicles that incorporates rotational resistance through a quasi-static balance of lateral slip through the contact-point assumption to give a compact closed-form solution for real-time prediction of lateral velocity and yaw rate.

Mohamed Ounally, Nicolas Samson, Mathis Turgeon-Roy et al. · 0 citations
Open access Sep 2026

Smooth Planning of Catch-to-Throw Movements for Robotics Systems Through Continuous C1 Trajectory Generation and State-Conditioned Release.

Traditional robotic catching and throwing process chains, often create a pause time of more than 300 ms by dividing catching and throwing into two consecutive steps, and inadequately utilize the post-grasping kinetic state. This paper presents a unified catching and throwing (UCT) process framework that eliminates this...

Mohammed Almanari, A. Rawea, Abdullah A. Dhaiban · 0 citations
Sep 2026

Proprioceptive-based terrain-adaptive rolling control for wheeled-quadruped robots

This paper presents a proprioception-based rolling control framework for wheeled-quadruped robots. The proposed framework serves as a reactive control approach for adaptive terrain traversal and body stabilization, without explicit motion planning. For wheeled-quadruped robots, adding wheels significantly increases t...

Shi-Chao Zhou, Zhong-Qu Xie, Ling-Kun Chen et al. · 0 citations
Nov 2026

Reliable 7-DOF Manipulator Execution via Arm-Angle Selection and Trajectory Retiming

Reliable execution of SRS-type seven-degree-of-freedom redundant manipulators with analytical inverse kinematics requires topological continuity and differential feasibility between planning and control. We present IAS-LBR, a two-layer framework combining Interval-based Arm-Angle Selection (IAS) with Look-ahead Bisecti...

Z. Zeng, Jing Guo, Jun-Peng Chen et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.