Skip to content
Open access

Dynamic dandelion optimization-based Model Predictive Control for accurate tracking of a 6-dof robot manipulator

2026 · FME Transaction · Vol 54, pp. 438-450 · 0 citations · 62 references

TL;DR

The attained MATLAB/SIMULINK results confirm and prove that optimized MPC controller, especially MPCbased DO, offers an efficient and robust control solution for high DOF robotic manipulators.

Abstract

This paper proposes an optimized control strategies for a dynamics 6-link robot manipulator using Model Predictive Control (MPC) and traditional Computed Torque Control (CTC). Two optimization methods are used for tuning of MPC controller, namely MPCbased Dandelion Optimization (DO) and MPCbased Genetic Algorithm (GA). The strategies are assessed in terms of performance indices based timedomain, settling time, rise time, overshoot percentage, and steady-state error (SSE). Simulation results depicted that traditional CTC suffers from higher control effort and slower transient response, mainly for links with high order. In contrast, MPC-based control strategy significantly improve dynamic performance and tracking accuracy. Among the tested approaches, MPCbased DO achieves minimal overshoot, smoother torque profiles, fastest convergence, and the lowest SSE across all six robotics links. The attained MATLAB/SIMULINK results confirm and prove that optimized MPC controller, especially MPCbased DO, offers an efficient and robust control solution for high DOF robotic manipulators.

Read PDF

Similar papers

Sep 2026

Adaptive MPC Path Tracking Control for Autonomous Vehicles

This work introduces a Model Predictive Control (MPC) path tracking controller, which is developed to boost robustness, tracking precision, and vehicle stability when navigating high-speed and high-curvature driving scenarios. First, a 3-degree-of-freedom (3-DOF) dynamic model of the vehicle is established to serve as...

Hanzhengnan Yu, Xiao-Yi Hou, Hao Zhang et al. · 0 citations
Open access Aug 2026

Robust Event-Triggered MPC with Parallel Optimization and Disturbance Rejection for Mobile Robots

The proposed event-triggered parallel optimization model predictive control strategy integrated with an extended state observer (ESO) for mobile robots operating under unknown disturbances achieves an approximately 40% reduction in tracking error compared with the conventional MPC, while also exhibiting faster response...

He-Jia Gao, Yan-Ling Guo, Pu-Hai Yang et al. · 0 citations
Open access Aug 2026

Comparative Analysis of Kinematic and Identified MIMO Models in Model Predictive Control for Mobile Robot Trajectory Tracking

Trajectory tracking remains one of the main challenges in mobile robotics, particularly when robots operate under real-world disturbances and modeling uncertainties. Model Predictive Control (MPC) has become one of the most effective solutions for this problem because of its ability to optimize future control actions w...

Diego Guffanti, Wilson Pavón, Alfredo Zapata · 0 citations
Conference Sep 2026

Model predictive control optimization for high-inertia turntable servo systems: position loop adaptation and performance validation

In follow-up control of large-inertia turntables, directly applying a position-loop controller designed for point-to-point positioning often leads to frequent start–stop behaviors and pronounced velocity oscillations. To address this issue, this paper proposes a model predictive control (MPC)-based position-loop strate...

Xiang Xuan, Jun-Shun Yuan, Yong Liu · 0 citations
Open access Sep 2026

Performance assessment of fractional order PID control for a 2DOF flexible joint robotic manipulator under various operating conditions

Flexible joint robot manipulators (FJM) exhibit high nonlinear dynamics and coupling effects, which make their control a challenging task. This paper proposes a fractional order PID (FOPID) cascade control strategy for a 2DOF FJM. The controller performance is compared with that of a sliding mode controller (SMC) under...

Ahmed M. Alkamachi, A. Mary · 0 citations

Neural-Augmented Torque Control for Robotic Manipulators: Modeling, Learning, and Real-Time Performance

This thesis investigates advanced modeling and control strategies for robotic manipulators, focusing on the DLR-HIT II robotic hand and the KUKA LBR iiwa. It presents three core contributions that integrate simulation, model-based control, and data-driven methods to improve torque and position control under uncertainti...

Ali Al-Shahrabi · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.