Skip to content
Open access

Mechanical properties and freeze–thaw durability of expansive soil reinforced with polypropylene and lignin fibers

Aug 2026 · PLoS ONE · Vol 21, pp. e0356058 · 0 citations · 29 references
Medicine

Abstract

To address the deterioration of expansive soil in seasonally frozen regions subjected to freeze–thaw cycles, this study investigated the effects of fiber modification by incorporating polypropylene fiber (PP) and lignin fiber (LF) on the swelling behavior, mechanical properties, and freeze–thaw durability of expansive soil. Using expansive soil as the base material, the modification effects of individual fiber incorporation were evaluated through free swell ratio, no-load swell ratio, and direct shear tests. Freeze–thaw cycle tests were then conducted on the composite fiber-modified soils, and the microscopic mechanism was analyzed in combination with SEM observations. The main conclusions are as follows: (1) For single-fiber modification, lignin fiber (LF) at a dosage of 1.2% exhibited the best overall performance, producing the greatest reduction in free swell ratio and the largest increase in shear strength. The incorporation of polypropylene fiber (PP) also significantly improved these parameters, although its effect was weaker than that of lignin fiber (LF). (2) Based on the results of single-fiber modification, the addition of 1.2% polypropylene fiber (PP) on the basis of 1.2% lignin fiber (LF) further improved the mechanical properties of expansive soil, under which the shear strength and unconfined compressive strength of the modified expansive soil were both enhanced. (3) In terms of freeze–thaw durability, the composite fiber-modified soil subjected to freeze–thaw cycles showed significantly lower attenuation rates of shear strength and unconfined compressive strength than the untreated specimens. SEM results showed that local overlapping and bridging structures formed between the fibers and soil particles, which helped delay crack propagation and weaken freeze–thaw damage. Through physical restraint and reinforcement effects, lignin fiber (LF) and polypropylene fiber (PP) jointly improved the mechanical performance and frost resistance of expansive soil, thereby providing an experimental reference for research on fiber modification of expansive soils in seasonally frozen regions.

Read PDF

Similar papers

Open access Oct 2026

Research on the Mechanical Properties and Durability Against Freeze–Thaw of Latex-Modified OPC-Based Materials

The intrinsic brittleness and poor crack resistance of OPC-based materials severely limit their service durability under complex environments. In this study, a composite latex polymer was fabricated via an ambient-temperature APS/STS redox initiation system, using N,N′-methylenebisacrylamide (MBA) as a cross-linking ag...

Lang Jin, Zi-Xiao Hong, Fei-Xiang Chen et al. · 0 citations
Open access Aug 2026

Effect of polypropylene fiber length on the mechanical properties, frost resistance, and microstructure of silica fume-modified self-compacting concrete

This study investigates the influence of polypropylene fiber length (6–20 mm) on the mechanical properties, frost resistance, density, and microstructure of silica fume-modified self-compacting concrete (SCC). Microstructural analysis by scanning electron microscopy (SEM) was performed on the fiber-free reference mixtu...

A. Ospanova, E. Tkach, Tolebi Myrzaliyev · 0 citations
Open access Sep 2026

Optimizing Injection Molding Parameters for Enhanced Properties in Glass Fiber-Reinforced Polypropylene

The mechanical properties of fiber-reinforced polymer matrix composites are largely influenced by the characteristics of their constituents, including the matrix and fibers. During injection molding, various process parameters such as thermal and pressure variations play a critical role in shaping the final properties...

Jorge Jiménez-Armendáriz, M. Alfaro-Ponce, M. Jiménez-Martínez · 0 citations
Open access Sep 2026

Fiber‐Reinforced Bio‐Epoxy Composites: Degradation Mechanisms in Saline Environment

This study examines the degradation behavior of bio‐epoxy composites reinforced with glass, basalt, carbon, and flax fiber yarns in a simulated saline environment. Fiber yarns and composite samples were exposed to 3.5% NaCl solution at 60°C for up to 3000 h. Mechanical degradation was evaluated through tensile streng...

Abdullah Iftikhar, A. Manalo, W. Ferdous et al. · 0 citations
Open access Sep 2026

Experimental Research on the Behavior and Crack-Sealing Capability of Masonry Mortars Reinforced with PVA Fibers

The durability of cementitious materials is essential for the development of sustainable construction, and the integration of self-healing mechanisms can reduce damage and maintenance costs. This paper analyzes the self-healing capacity of masonry mortars reinforced with polyvinyl alcohol (PVA) fibers and crystalline a...

Ioan Nicolae Scurtu, Călin Mircea, A. Hegyi et al. · 0 citations
Open access Sep 2026

Mechanisms of crack evolution and shear strength degradation in biopolymer-stabilized slurry soils under Dry–Wet cycling

Biopolymers are environmentally friendly alternatives to conventional soil stabilizers, yet the response of stabilized slurry soils to repeated dry–wet cycling, particularly crack evolution and associated strength degradation, remains insufficiently understood. To address this gap, this study evaluated slurry soils tre...

Ding-Yu Ni, Norinah Abd Rahman, S. F. Mohd Razali et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.