Skip to content

Similar papers

Open access 2026

Influence of petrochemical contamination on the geotechnical behavior, shear strength characteristics, and compressibility indices of sandy clay soil

One of the most important geo-environmental issues is the contaminated soils in the construction industry which are caused by the contamination of petrochemicals. In contrast with previous studies which evaluated individual soil properties separately, this study presents an integrated experimental evaluation of index p...

Mustafa M. Jasim, M. Salih · 0 citations
Open access Sep 2026

Evaluating the Geotechnical Properties of Lateritic Soils Stabilized Using Hybridized Organic- Inorganic Materials

Structural failure is one of the major challenges in the construction industry. This study was conducted to evaluate the possibility of using agricultural waste materials, as stabilizing agents for weak lateritic soil. The soil was treated with various quantities of cement, yam peel ash (YPA), and coconut fibre ash (CF...

O. Akwenuke · 0 citations
Open access Sep 2026

Microstructural and Geotechnical Evaluation of Cement-Stabilized Crude Oil-Contaminated Silty Clay

This study assessed the performance of Ordinary Portland Cement (OPC) in stabilizing crude oil-contaminated silty clay soil with special focus on the improvement of the geotechnical and microstructural properties. Geotechnical tests were conducted on soil samples contaminated with crude oil at concentrations up to 20%...

Haqi H. Abbood, Mohammed K. Hatem, H. Abbas et al. · 0 citations
Open access Sep 2026

Stabilization of Low Plastic Clay Soil with Recycled Pet Strips

Expansive and low plasticity clay soils pose significant challenges in geotechnical engineering due to their low bearing capacity, low strength, and high volumetric instability under moisture variations, often leading to excessive settlements, cracking, and premature failures of pavements and shallow foundations. Conve...

Amrit Sharma, Amrit Chalise, Aaradhya Acharya et al. · 0 citations
Open access Sep 2026

Moisture Effect on the Strength Properties of Patani-Clay Modified Asphalt Concrete

Traditional asphalt concrete is an important road surfacing material and tends to fail when submerged in water for a period under traffic load. The study is aimed at investigating the effect of clay, sourced from Patani, as modifier of asphalt concrete on Marshall mechanical properties and its resistance to moisture da...

D. S. Toscanini · 0 citations
Open access Aug 2026

Clay and Microsilica Additives’ Effect on the Properties and Structure of Injectable Cement–Clay Mortars for Soil Consolidation

The potential of clay as a replacement for Portland cement in the manufacture of injection cement–clay mortars (ICCMs) for soil stabilization is examined in this investigation. The objective of this study is to produce environmentally friendly injection-molded mortars for soil stabilization based on Portland cement (PC...

E. Shcherban', S. Stel'makh, A. Beskopylny et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.