Skip to content
Open access

SpectralTCN: A multi-resolution wavelet gating network for vibration-based structural damage detection

Sep 2026 · PLoS ONE · Vol 21 · 0 citations · 41 references
Medicine

TL;DR

SpectralTCN is proposed, a temporal convolutional network augmented with a Wavelet Gating Module (WGM) that performs learnable, data-dependent multi-resolution filtering within each convolutional block, suitable for near-real-time, online damage detection in continuous bridge monitoring.

Abstract

Vibration-based structural health monitoring (SHM) detects damage by identifying subtle changes in a structure’s dynamic response. Deep learning models have shown strong potential for automating this classification task. However, most existing architectures share a key limitation: they either process signals purely in the time domain, or apply a global frequency-domain transform that discards information about when each frequency component occurs. This is a serious drawback, because structural damage typically manifests as short, localised events confined to specific frequency bands. This paper proposes SpectralTCN, a temporal convolutional network augmented with a Wavelet Gating Module (WGM) that performs learnable, data-dependent multi-resolution filtering within each convolutional block. The WGM decomposes intermediate features via the Discrete Wavelet Transform (DWT) into physically interpretable sub-bands corresponding to distinct structural vibration modes, applies input-adaptive sigmoid gates independently at each decomposition level, and reconstructs the filtered signal via the Inverse DWT (IDWT) with a learnable residual connection initialised to zero. Unlike FFT-based approaches, the DWT simultaneously preserves both time and frequency information, enabling the network to detect both the timing and the spectral location of damage-induced anomalies. Combined with Generalized Mean (GeM) pooling and large-kernel causal depthwise convolutions, SpectralTCN is evaluated on two benchmark datasets: the Z24 Bridge benchmark and a finite element model (FEM)-derived dataset of the My Thuan cable-stayed bridge. Experiments against 10 baseline models and 4 ablation variants, evaluated via stratified 5-fold cross-validation, demonstrate the effectiveness and generalisation capability of the proposed approach: SpectralTCN attains the highest mean accuracy on both benchmarks (92.2% on Z24 and 92.1% on My Thuan) and outperforms the strongest baseline in the 5-fold cross-validation protocol. In addition, the proposed architecture operates on short, streaming acceleration windows with a purely convolutional backbone of moderate computational cost, making SpectralTCN suitable for near-real-time, online damage detection in continuous bridge monitoring.

Read PDF

Similar papers

Open access Aug 2026

Unsupervised structural damage detection methodology using deep convolutional autoencoder and image clustering with wavelet transmissibility pattern spectra

Vibration-based structural damage detection under non-stationary excitation remains challenging due to the complex time-varying characteristics of structural responses and the limited availability of labeled data. Although existing unsupervised deep learning approaches have demonstrated potential for extracting damage-...

Guan-Dong Qiao, Jia-Hao Tai, Xiao-Yue Du et al. · 0 citations
Open access Sep 2026

MWCDGN: a spectral-kurtosis guided multi-wavelet causal disentanglement generalization network for gearbox cross-domain fault diagnosis

Domain generalization-based fault diagnosis methods have gained widespread attention for addressing cross-domain challenges under unseen operating conditions. However, current statistical methods primarily focus on capturing the relationships between vibration signals and labels, which often leads to entangled features...

Ming-Lie Li, Hong Jiang, Xiang-Feng Zhang et al. · 0 citations
Open access Sep 2026

An explainable digital twin framework for structural health monitoring: decision-level fusion of vibration and image diagnostics using SHAP and Grad-CAM

A framework that combines vibration-based and image-based damage assessment with explainable artificial intelligence and a data-driven digital twin to support a continuously updated data-driven digital twin for structural health monitoring is presented.

V. K. Kiran, Ranjitha B. Tangadagi, M. Manjunatha · 0 citations
Open access Aug 2026

Unsupervised damage detection using singular-vector feature maps and 2D convolutional autoencoders: Validation on a multi-state shear-frame experiment

We present an unsupervised, vibration-based damage detection framework that integrates a new cross-spectral feature with a deep convolutional autoencoder (CAE). While autoencoders have been widely explored for analyzing time-series responses, the use of spectral features—and particularly those exploiting cross-spectral...

D. Raviolo, K. Kvåle, Ø. Petersen et al. · 0 citations
Open access Aug 2026

MSFTNet: multi-scale frequency-temporal network for machinery fault diagnosis under complex working conditions

A multi-scale frequency-temporal network that achieves an average accuracy of 99.58% under variable speeds and maintains a robust accuracy of 70.14% even under extreme noise conditions, outperforming baseline methods across a range of complex scenarios.

Deguang Li, Zhen Ding, Yixin Chen et al. · 0 citations
Aug 2026

Multitask learning for simultaneous damage detection and localization in beam-like structures using fibre-optic vibration sensor

Structural health monitoring based on vibration signal analysis has demonstrated itself as a powerful technique for preventing structural damage, since only the dynamic response of structural elements is required. Moreover, in beam-like structures, damage alters the system’s vibration characteristics, providing valuabl...

Denzel A. Rodriguez-Ramirez, J. Martínez-Angulo, Daniel Jauregui-Vazquez et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.