Error minimization alone is insufficient for industrial process control. This article develops a weighted composite-objective evolutionary optimization scheme for regulating the temperature of a nonlinear, jacket-equipped continuous stirred-tank reactor (CSTR) using a PID controller. Such reactors exhibit strong nonlinearity and pronounced parameter sensitivity. However, conventional PID tuning rarely delivers satisfactory dynamics together with low control effort. To address this issue, the authors employ several metaheuristic optimizers to determine the PID gains, namely Teaching–Learning-Based Optimization (TLBO), the Whale Optimization Algorithm (WOA), African Vulture Optimization (AVO), the Imperialist Competitive Algorithm (ICA), and Henry Gas Solubility Optimization (HGSO). The existing formulations do not provide a cost criterion that weighs the tracking error together with the effort demanded by the actuator. It is challenging to improve the transient behavior and at the same time keep the actuator demand low. The authors treat both terms simultaneously, and transient behavior improves while limiting the control effort. The newly formulated criterion is benchmarked against the classical indices, namely the integral of squared error (ISE), the integral of time error (ITE), and the integral of time-weighted absolute error (ITAE). The gains in rise time, settling time, overshoot suppression, and disturbance handling are verified and presented. The proposed formulation incorporates both tracking error and control effort into a single weighted composite objective. Five metaheuristic optimization algorithms, namely TLBO, ICA, WOA, AVO, and HGSO, are considered, while ISE, ITE, and ITAE are used as conventional benchmark objectives. The controllers are evaluated using directly executed simulations under a common nonlinear CSTR configuration, with emphasis on transient response, steady-state tracking, and actuator usage.
-Continuous Stirred Tank Reactors (CSTRs) are important process units in the petrochemical industry, where effective temperature and concentration control is essential for maintaining product quality, process safety, and operational efficiency. The nonlinear characteristics of CSTRs, coupled with process disturbances a...
Don Basil Emmanuel Nwiwure, Mepbari Nwigbo, Friday Iue et al.· Iconic research and engineer...· 0 citations
Abstract Level control of spherical tank systems is challenging due to strong process nonlinearity and varying dynamics across different operating regions. Traditional PID tuning methods and standalone optimization techniques often fail to ensure consistent performance under such conditions. In this paper, a novel hybr...
Abhay Pakhare, Sharad P. Jadhav, Mukesh D. Patil· Journal of Automation, Mobil...· 0 citations
An intelligent IMC-based controller is proposed, in which the inversion gain of the temperature regulation loop is optimally tuned (offline) using a Genetic Algorithm to optimize the performance of robust control techniques applied to time-delay systems.
Among the evaluated methods, PSO consistently provides the best overall performance by achieving faster convergence and superior solution quality under limited function evaluations, while GWO and WOA exhibit competitive and robust performance across challenging benchmark problems.
Chong-Wen Huang, Hao-Xiang Lei, Cheng-Yi Li et al.· Journal of Applied Technolog...· 0 citations
Fuzzy PID controllers are widely adopted in the field of industrial manufacturing. However, when applied to temperature control systems characterized by large inertia, significant time delay, and potentially time-varying delay, conventional fuzzy PID controllers still face considerable challenges in balancing dynamic r...
Jia-Jun Zheng· 2026 6th International Confe...· 0 citations
To address the tradeoff among high force, fast response, and compact volume in active magnetic dry friction dampers, this paper proposes a systematic multi-objective optimization framework centered on an interpretable global design surface. A parametric analytical model mapping the electromechanical couplings is establ...
Jian Ge, Qian Song, Shu-Qian Cao et al.· AIAA Journal· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.