Energy-Oriented CGLA Mapping of a Memory-Polynomial Digital Predistortion Kernel

Abstract

Memory-polynomial digital predistortion (DPD) evaluates a small fixed coefficient set over a sliding input history, so its reduction step is a complex-MAC workload with local reuse. We map this DPD reduction kernel onto In-Memory Accelerator eXtension (IMAX), a programmable CPU-Grounded Linear Array (CGLA) composed of a one-dimensional processing-element/local-memory pipeline. For a (P,M)=(5,5) odd-order memory-polynomial instance, the mapping keeps the 120 B coefficient set in local memory, advances the five-tap history over 1024-sample tiles, and realizes the 15 order-delay terms as a 33-stage streaming complex-MAC reduction. The evaluation measures kernel latency and modeled energy. All measured paths use the same single-precision complex workload of 32 sequences, each with 2048 complex samples, across an IMAX FPGA prototype, a CUDA implementation on an RTX 4090 system, and an ARM-NEON implementation on Jetson AGX Orin. With this 1024-sample tile configuration, the IMAX FPGA prototype reports 20.201 ms end-to-end latency and 1.948 ms kernel-only latency. Using the previously reported 28 nm IMAX frequency and power model, the projected IMAX configuration gives 3.14 ms end-to-end latency and 0.34 ms kernel-only latency. The RTX 4090 baseline has the lowest end-to-end latency at 0.484 ms. Under model-based platform power accounting and the stated power assumptions, the projected IMAX configuration gives 169.1 times smaller modeled end-to-end energy per batch than the RTX 4090 baseline. This value uses platform power assumptions rather than workload-dependent runtime power or a direct silicon power measurement. A controlled synthetic PA-model validation checks that the same 15-term form improves test-set NMSE by 26.1 dB and ACLR by 26.0 dB. These results characterize the mapped memory-polynomial DPD reduction on IMAX for the evaluated tile configuration and power model.