Skip to content

A bioinspired bistable robotic gripper with decoupled palm and finger reconfiguration

Sep 2026 · Bioinspiration & Biomimetics · Vol 21 · 0 citations · 50 references
Physics Medicine

TL;DR

A three-finger adaptive bioinspired gripper driven by prestressed tape springs, inspired by the dual-dimensional prey-capture mechanism of Drosera capensis and the basal-scale adaptation strategy of the octopus, providing an energy-efficient and low-dimensional solution for adaptive robotic grasping in unstructured environments.

Abstract

Existing soft grippers often suffer from slow actuation, continuous energy consumption during grasp maintenance, and limited payload-to-weight ratios, which restrict their application in dynamic and unstructured environments. In addition, fixed-geometry designs and multi-actuator architectures frequently compromise geometric adaptability and increase control complexity. To address these limitations, this paper presents a three-finger adaptive bioinspired gripper driven by prestressed tape springs, inspired by the dual-dimensional prey-capture mechanism of Drosera capensis and the basal-scale adaptation strategy of the octopus. A hierarchical bioinspired design is realized through a reconfigurable palm based on a crank-slider linkage for synchronous radial spacing adjustment, together with retractable, variable-length fingers that continuously adapt to objects of different sizes. A centralized cable-driven triggering mechanism exploits the bistable snap-through behavior of prestressed tape springs to achieve rapid compliant enveloping and zero-power grasp maintenance. A discrete rigid-segment kinematic model is developed to characterize the triggering and curling process, revealing a fully decoupled grasping workspace with a palm diameter ranging from 90 mm to 160 mm and finger lengths adjustable from 0 to 135 mm. Experimental results demonstrate closure times below 60 ms across all configurations, a payload-to-weight ratio of 18.75, and a 100% success rate in damage-free static grasping of 19 objects with diverse geometries, materials, and masses. The proposed design integrates biological adaptive capture strategies with a reconfigurable bistable architecture, providing an energy-efficient and low-dimensional solution for adaptive robotic grasping in unstructured environments.

View source

Similar papers

Open access Oct 2026

Multistable Kirigami Soft Grippers with Sustainable Magnetic Actuation and Conformal 3D/4D Printing.

Soft robotic grippers are well suited to handling delicate and irregular objects, yet many remain difficult to deploy in practice due to high hardware overhead (pumps, valves, motors) and continuous energy demand during holding. This study presents a sustainable multi-stable soft gripper that decouples activation from...

Moslem Mohammadi, Eui-Hyun Kim, Keun Park et al. · 0 citations
Open access Nov 2026

Variable-Structure Soft Actuator for Multi-Mode Grasping

Soft actuators are widely used in grasping tasks involving irregularly shaped and fragile objects due to their inherent compliance. However, most existing soft actuators lack shape-morphing capabilities, making it difficult to achieve optimal grasping performance when faced with different operational scenarios. Inspire...

Xuan-Hao Zhang, Jian-Tao Yao, Shuai Zhang et al. · 0 citations
Open access 2026

Implementation and Evaluation of a Size-Adaptive Variable-Stiffness Soft Gripper Using Vision and Torque Monitoring

This work introduces an intelligent grasping paradigm that obviates the need for discrete fingertip sensors by leveraging a dual-modality approach, fusing data from an onboard camera and motor torque feedback via a rule-based dead-zone mechanism.

G. Cho, Jun Ho Hwang, Jih-Yun Lee et al. · 0 citations
Open access Sep 2026

Three-jaw gripper driven by rhombic dielectric elastomer actuators

This paper proposes a three-jaw gripper driven by rhombic dielectric elastomer (DE) actuators to address the inadequate adaptability and potential workpiece damage of conventional rigid grippers, as well as the complex drive mechanisms, limited clamping force, and insufficient adaptability of existing flexible grippers...

Jian-Ji Mei, Lu Xiao, Yu-Chen Xue et al. · 0 citations
Sep 2026

Soft dexterous hand with enhanced grasping performance enabled by rigid-flexible structure and visual perception

Soft robotic hands face trade-offs between flexibility and load capacity, with rigid-palm designs limiting grasping conformity and fully soft structures struggling under payloads. Existing pneumatic systems suffer from tubing interference and poor sealing. This study presents a bioinspired modular hand combining rigi...

Rui-Qi Yin, Chuan-Wang Liu, Zhen-Hao Sun et al. · 0 citations
Open access Oct 2026

Actuatorless Caging Gripper with Interlinked Fingers Driven by Contact Force with the Ground

Grippers are extremely important in robotics. Conventional grippers are composed of rigid components, but soft grippers made of soft materials have also gained considerable attention. Most grippers require actuators such as electrical motors and pneumatic systems for driving; however, these actuators increase the weigh...

Yuki Satake, Shinichi Hirai · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.