Sep 2026· Steel Research International· 0 citations· 30 references
Abstract
Double‐pass hot compression tests of 22Cr‐25Ni austenitic heat‐resistant steel were conducted at the deformation temperature of 950–1150 °C, strain rate of 0.01–1 s
−1
, and interpass time of 1–200 s. On this basis, four machine learning models including artificial neural network (ANN), random forest (RF), XGBoost, and LightGBM were established to predict the flow stress. XGBoost model achieved the optimal performance, with the coefficient of determination (
R
2
) of 0.9988, root mean square error (RMSE) of 2.9514 MPa, mean absolute error (MAE) of 0.8711 MPa, and average absolute relative error (AARE) of only 0.0097, which can accurately characterize the evolution law of double‐pass flow stress under different process parameters. Feature importance revealed that deformation temperature (64%) and strain rate (29%) are the dominant influencing parameters, while strain (6.8%) and interpass time (0.2%) contribute less. Based on the data above, the static recrystallization (SRX) fraction during interpass times was further calculated, indicating that increasing deformation temperature, raising strain rate, and prolonging interpass time all promote the SRX process. This study provides data and theoretical support for the optimization of hot working processes of 22Cr‐25Ni steel and also offers a reference for the intelligent characterization of hot deformation behavior of other austenitic heat‐resistant steels.
Rock‐filled concrete (RFC) offers material and environmental benefits for mass‐concrete structures, but its heterogeneous composition complicates prediction of its high‐strain‐rate compressive response. This study developed a machine learning framework to predict the strain rate, dynamic compressive strength, and dynam...
Muhammad Ibrar Ihteshaam, Feng Jin· Journal of The American Cera...· 0 citations
The present constitutive model can accurately predict the flow stresses in materials during thermal deformation, which is of great significance for the formulation and improvement of hot working processes. This study performed hot deformation testing on rare earths-containing 3Cr13MoNiVNb martensitic stainless steel,...
Wen-Bo Fan, Hai-Yan Wang, Xue-Yun Gao et al.· Ironmaking & Steelmaking...· 0 citations
The results suggest that the combined experimental and machine learning (ML) approach can be used to predict the temperature‐dependent mechanical behavior of WLMD‐fabricated Ti–6Al4V alloy.
Prashanth Muralishanker, Sivsankaran Subbarayan, K. Rasu et al.· Advanced Engineering Materia...· 0 citations
This integrated flow‐stress modeling, processing‐map construction, and EBSD verification provides guidance for optimizing the hot deformation of this high‐nitrogen austenitic stainless steel within the investigated thermomechanical range.
Ying-Hu Wang, Limei Cheng, Zhendong Sheng et al.· Steel Research International· 0 citations
The high‐temperature mechanical properties of steel play a crucial role in the design of continuous casting and straightening process parameters. In this study, high‐temperature compression tests were conducted on 4Cr13 continuous casting billet samples using the Gleeble‐3800 thermal simulation machine, obtaining the...
Wei Tang, Wenxue Wang, Yu-Ying Lin et al.· Steel Research International· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.