Sep 2026· ACS Applied Materials and Interfaces· Vol 18, pp. 49558-49568· 0 citations· 50 references
Medicine
Abstract
Small-molecule organic mixed ionic-electronic conductors (OMIECs) offer an interesting alternative to polymers for the fabrication of reliable organic electrochemical transistors (OECTs) thanks to their minimal batch-to-batch variability. The environmental and operational stability of the devices remains a significant issue, particularly in n-type OMIECs, prompting the molecular design of materials with lower LUMO levels and tighter intermolecular forces. In this work, we apply a common strategy that achieves these goals, fluorination, to our previously developed silicon phthalocyanine OMIEC and use silane-based surface treatments as a case study for the effect of surface treatment on the performance of small-molecule OECTs. When compared to the non-fluorinated material, bis(2-[2-(2-methoxyethoxy)ethoxy]acetate) silicon tetrafluoro phthalocyanine (MEEA-F4SiPc) OECTs fabricated on SiO2 demonstrate a lower threshold voltage (VT) at 0.406 ± 0.056 V and better cycling stability. Using surface treatments resulted in faster uptake of ions when swelling as evidenced by EIS and Raman spectroscopy. Though this also resulted in slight improvements in the transient characteristics of the OECTs through faster τon values, the steady-state characteristics of the OECTs were unchanged. This study suggests surface treatment as a strategy for improved small-molecule OECT performance.
Optimizing the steady-state performance of organic electrochemical transistors (OECTs) requires simultaneous control over both molecular-level design and structural ordering in organic mixed ionic-electronic conductors (OMIECs). Here, we report a series of diketopyrrolopyrrole (DPP)-based polymers functionalized with a...
Shinbee Oh, Tae Hoon Kim, Dahyun Jeong et al.· Advances in Materials· 0 citations
Functionalizing poly(3,4-ethylenedioxythiophene) (PEDOT) with pendant ionizable groups to form conjugated polyelectrolytes is an attractive approach for bioelectronic applications, offering improved aqueous processability, enhanced ionic transport, and greater tunability of the polymer-electrolyte interface compared...
Phthalocyanines are macrocyclic compounds with exceptional optical and electronic properties, making them indispensable in fields from organic electronics to catalysis. A significant advancement in this family is the development of silicon phthalocyanines (SiPcs), where axial ligands suppress aggregation and enhance...
Lenka Černá, Alba García-Frutos, Ana Barragán et al.· Journal of Physical Chemistr...· 0 citations
Fabricating a poly(3,4-ethylenedioxythiophene) (PEDOT):poly(4-styrenesulfonate) (PSS)-based organic electrochemical transistor (OECT) that simultaneously displays a high transconductance and a low threshold voltage remains challenging owing to the inherent trade-off between the charge carrier mobility and ionic acces...
S. Son, S. Park, Haeri Kim et al.· ACS Applied Electronic Mater...· 0 citations
The cathode interlayer (CIL) is crucial for the development of organic photovoltaics (OPVs). However, the widespread use of CILs based on perylene diimide and naphthalene diimide is constrained by their strong intrinsic aggregation tendency. Herein, benzoic acid (BA) and its derivatives bearing different quantities of...
Lei Yang, Xin Liu, Zong-Tao Wang et al.· ACS Applied Materials and In...· 0 citations
Thin metal–organic framework (MOF) films, known as surface-anchored metal–organic frameworks (SURMOFs), offer convenient handling and a variety of new applications due to the direct immobilization of porous crystalline materials on various substrates. In this study, we demonstrate the feasibility of using luminescent S...
Theresa K. Mautz, F. Gasser, R. Resel et al.· Journal of Materials Chemist...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.