Skip to content
Open access

STFT–LoRA–DANN: a lightweight adversarial transfer learning framework for cross-load bearing fault diagnosis

Sep 2026 · Scientific Reports · Vol 16 · 0 citations · 73 references

TL;DR

The results indicate that the combination of LoRA and adversarial domain adaptation provides a scalable parameter-efficient paradigm for low-cost intelligent mechanical fault diagnosis.

Abstract

Due to the significant differences in energy distribution, noise characteristics, and feature patterns of vibration signals under varying load conditions, cross-load fault diagnosis has become a central challenge in rolling bearing health monitoring. To address the weak cross-domain generalization and high adaptation cost of traditional deep models, this study proposes an integrated lightweight transfer learning framework termed STFT–LoRA–DANN. The method first constructs stable time–frequency representations via STFT to enhance feature consistency across different loads. Subsequently, only a small number of low-rank adaptation parameters are inserted into the pretrained SeResNeXt50 backbone, enabling controllable feature-space adaptation with substantially fewer trainable parameters and reduced optimization cost. Finally, adversarial domain alignment based on DANN is employed to explicitly reduce the feature distribution discrepancy between source and target domains. Across twelve cross-load transfer tasks on the CWRU dataset, the proposed framework achieves near-saturated and competitive performance, reaching an average accuracy of 99.4% and outperforming classical transfer baselines such as MMD, MK-MMD, and DANN in most transfer directions. Confusion matrix and training-dynamics analyses further demonstrate that the framework maintains stable convergence and good generalization behavior with limited parameter updates, suggesting potential practical value for cross-load diagnosis scenarios with data scarcity and varying operating conditions. The results indicate that the combination of LoRA and adversarial domain adaptation provides a scalable parameter-efficient paradigm for low-cost intelligent mechanical fault diagnosis.

Read PDF

Similar papers

Open access Oct 2026

Feature-Enhanced Fusion and Adversarial Domain Adaptation for Cross-Condition Few-Shot Fault Diagnosis of Bearings

Rolling bearings are core components of rotating machinery, and their operational status is critical to the safe and reliable service of major equipment. However, the variable rotational speeds and loads in industrial environments cause significant data distribution drift; coupled with an extreme scarcity of labelled f...

Yu-Xin Li · 0 citations
Sep 2026

ConvNeXt-FECAM with domain adaptation for rolling bearing cross-condition fault diagnosis

A fault diagnosis method based on a ConvNeXt-FECAM architecture, integrated within an enhanced conditional adversarial domain adaptation framework, which has potential for cross-condition fault diagnosis and condition monitoring of rotating machinery is proposed.

Shu-Hang Liu, Gui-Ji Tang, Long Zhang · 0 citations
Open access Oct 2026

Multi-Structure Fusion Conditional Domain Adaptation for Bearing Fault Diagnosis

To address the limited feature extraction capability of single-architecture deep models, pronounced distribution discrepancies in bearing vibration signals, and instability during cross-domain training under varying operating conditions, a multi-structure fusion conditional domain adaptation (MSFCDA) method is proposed...

Cai-Rong Li, Jia-Nan Wang · 0 citations
Open access 2026

LFA-MFNet: Local Feature-Aligned Multisource Information Fusion for Fault Diagnosis Under Limited and Imbalanced Conditions

Real-world data-driven fault diagnosis is constrained by scarce fault samples, limited and imbalanced (L&I) class distributions, and heterogeneous multisensor data under operating condition shifts, which impede stable and generalizable discriminative representation learning. We propose the local feature alignment multi...

Cheng Peng, Tian-Hong Huang, Zhao-Hui Tang et al. · 0 citations
Open access Oct 2026

A cross-modal fusion network for equipment fault diagnosis exclusively adopting current signals

Fault diagnosis based solely on current signals is attractive for practical deployment because of its low sensing cost, but its performance is easily degraded by weak fault representation and rapid speed variations. To address these issues, this study proposes a cross-modal feature collaborative matching distillation f...

Chao Li, Ming Li, Jing-Long Chen et al. · 0 citations
Open access Sep 2026

Two-stage adversarial collaborative diagnosis framework via transferable perturbation mechanism for HST bogies with long-tailed data

Comprehensive experiments on HST long-tailed fault data across varying loads and speeds indicate that proposed framework outperforms the-state-of-art SDG methods in accuracy, recall, and F1-score, demonstrating strong potential in industrial diagnosis applications.

Yuan-Hong Chang, Yu-Jian Xie, Jia-Yi Li et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.