Nominally isothermal compression tests were performed on Q420DR low-temperature pressure-vessel steel at 900–1150 °C and strain rates of 0.05–10 s−1, with a target true strain of 0.7. The effects of temperature and strain rate on flow behavior were investigated. Flow stress increased with decreasing temperature and increasing strain rate, while higher temperatures and lower strain rates favored more pronounced flow softening. A peak-stress-based Arrhenius-type constitutive relationship was established, yielding an apparent hot-deformation activation energy of 385.987 kJ·mol−1. Processing maps based on the dynamic materials model were constructed using experimental flow stresses at fixed true strains of 0.1–0.6. At a true strain of 0.6, relatively high power-dissipation efficiencies combined with positive instability parameters indicated a potentially favorable processing domain at approximately 1050–1100 °C under low strain rate conditions. Predicted flow instability was mainly concentrated at low temperatures and relatively low strain rates. The distributions of power-dissipation efficiency and instability boundaries varied with strain, indicating that processing conditions should be assessed over the deformation path. These findings provide preliminary guidance for hot working under the investigated single-pass compression conditions.
This study systematically investigated the thermal deformation characteristics of industrial-grade Q690 HSLA steel under different temperatures and strain rates through isothermal compression tests conducted on the Gleeble-3500 simulator. The flow stress of Q690 steel exhibits significant sensitivity to deformation par...
Hai-Wen Liu, Yang Yuan, Li-Feng Fan et al.· Metals· 0 citations
In this study, the high-temperature deformation behavior of TC11 titanium alloy was investigated through hot compression experiments. The relationship between flow stress, strain rate, and deformation temperature was described by analyzing stress–strain curves and establishing a constitutive equation. A hot processing...
Yan-Chun Zhu, Ye-Fan Li, Jie Lu et al.· Metals· 0 citations
Accurate characterization of flow-stress behavior is essential for modeling the dynamic deformation and machining response of titanium alloys. In this study, the mechanical behavior of near-alpha TA19 titanium alloy was investigated by quasi-static compression tests at strain rates of 0.001–0.01 s−1 and split Hopkinson...
Li-Mei Liu, Dong-Liang Wang, Ji-Lin Zhang et al.· Materials Research Express· 0 citations
The hot deformation behavior of a novel Nickel-Cobalt-based superalloy for advanced aeroengine turbine disk applications was systematically investigated via isothermal compression tests (1090–1230 °C, 0.01–10 s−1) using a Gleeble-3800 simulator. Flow stress exhibits strong sensitivity to deformation temperature and str...
This study investigated the hot deformation behavior of a novel ultra-low carbon high-strength stainless steel through single-pass isothermal hot compression tests using a Gleeble-3800 thermomechanical simulator. The hot deformation behavior were examined under deformation temperatures ranging from 900 to 1150 °C, true...
Dong-Chen Jiang, Ren-Li Fu, Zhen-Bao Liu et al.· Materials· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.