Design of Reactive Power Minimization Wireless Battery Charger Utilizing a Topology Automatic Reconstruction Strategy
Abstract
The traditional battery charging process generally consists of a constant current (CC) phase followed by a constant voltage (CV) phase. However, existing CC–CV transition methods still face several challenges, such as the need for battery state monitoring, bilateral communication, or potential cross-coupling among multicoil couplers. To address these problems, this article proposes an innovative topology automatic reconstruction (TAR) technology that enables smooth CC–CV transition without any additional sampling or control strategy. The key to the proposed TAR is the secondary topology structure, where the output ports of two inductors are connected via a diode. The voltage difference across the diode will change with the battery load variation. Since the one-way conduction characteristic of a diode, the equivalent circuit of secondary topology will be reconstructed automatically for CC–CV charging profile as the charging process goes on. Based on the proposed TAR technology, a family of wireless battery charger topologies can be obtained. Moreover, a zero phase angle input can be satisfied during the whole charging process to eliminate the reactive power for all of them. An experimental prototype with a CC output of 3.6 A and a CV output of 144 V is built to validate the feasibility of the proposed TAR technology.