Skip to content
Open access

Multi-Scenario Adaptive High-Fidelity Self-Healing Elastomer Based on Poly(Ionic Liquid) Containing Polyurethane for Temperature-Pressure Sensing and Human-Machine Interaction.

Oct 2026 · Small · pp. e76141 · 0 citations · 76 references
Medicine

TL;DR

Skin-friendly ionogels with multi-scenario adaptive, high-fidelity, and self-healing performances were critical building units in wearable signal transmission devices and provided a new avenue for flexible wearable sensors and promoted the development of remote mechanical control systems.

Abstract

Skin-friendly ionogels with multi-scenario adaptive, high-fidelity, and self-healing performances were critical building units in wearable signal transmission devices. Traditional ionogels doped with small-molecule ionic liquids (SMILAs) into polymers yielding weak interchain forces, poor compatibility, and migration. To remedy this issue, a kind of polyurethane (PU) based healable ionogel containing polyimidazolium (PIM), adipic acid dihydrazide (ADH), and SMILAs (IL; BMIM:TFSI) was fabricated via continuous chemical copolymerization and physical co-molding. The PIM/ADH/ILn@PU (n = 0.1-0.6, representing the content of IL) ionogels exhibited excellent mechanical properties with tensile strength of 10.93 MPa, elongation as high as 1020.23%, ionic conductivity up to 0.45 mS/cm, and an efficient self-healing ratio of 98.3% in 3 h at 33°C. Moreover, the PIM-induced low migration of IL without an electric field, outstanding antibacterial activity (over 99% inhibition against E. coli and S. aureus), superior biocompatibility (over 95% cell viability), sweat and humidity insensitivity, and multiple regenerability were also demonstrated. The strain sensitivity and temperature-pressure sensing capability endowed these ionogels to be optimized candidates to construct motion monitoring, underwater early warning, and breathing monitoring devices. The realization of the human-machine interaction model provided a new avenue for flexible wearable sensors and promoted the development of remote mechanical control systems.

Read PDF

Similar papers

Open access Sep 2026

Mechanically Robust and Self-Healing Sustainable Solid-State Ion-Conductive Elastomer for Near-Infrared-Driven Noncontact Sensing.

Stretchable solid-state ionic conductive elastomers (SICEs), serving as essential materials for ionotronic devices, exhibit great promise in emerging applications in electronic skin, soft robotics, especially in wearable sensors. Nevertheless, the development of such materials with high strength, self-healing, and ioni...

Ming-Liang Wu, Quan-Yong Cheng, Yi-Dong Li et al. · 0 citations
Sep 2026

Deep Eutectic Solvent-Mediated Conductive Polyurethane Elastomers with Synergistic Self-Healing, Adhesion, and Wide-Temperature Sensing for Wearable Health Monitoring

These results demonstrate a DES-mediated strategy for balancing mechanical, ionic, interfacial, and sensing functions while also identifying mild-temperature healing and quantitative long-term retention as areas requiring further optimization.

Yang Bai, Yu-Cong Zhang, Yu-Chao Wang et al. · 0 citations
Oct 2026

Self-healing poly(vinyl alcohol)/carboxymethyl chitosan/astragalus polysaccharide hydrogels with bioactivity for high-performance strain sensing and human-machine interaction.

Hydrogel-based strain sensors hold great promise for wearable bioelectronics but conventional synthetic networks often lack dynamic repairability, tissue-matched mechanics, and sustainability. Here, we report a type of versatile polysaccharide-based hydrogel strain sensor (PC/APS), composed of poly(vinyl alcohol) (PVA)...

Tian-Yi Lu, Meng Sun, Qian-Qian Wang et al. · 0 citations
Sep 2026

POLYURETHANE ELASTOMER WITH CONCURRENTLY ENHANCED MECHANICAL STRENGTH AND SELF-HEALING EFFICIENCY ENABLED BY INTEGRATION OF DYNAMIC BOROXINE AND METAL-LIGAND BONDS

Conventional self-healing polyurethanes (PUs) face an inherent trade-off between mechanical strength and self-healing efficiency. We report a dual-dynamic crosslinked PU elastomer (PU-Eu x ) that achieves concurrent enhancement of mechanical properties and self-healing capability by integrating boroxine coval...

Jia-Rui Yang, Xi Liu, Xiang-Ru Ren et al. · 0 citations
Sep 2026

Flexible and Anti-freezing Cu@Fe3O4-PANI/Polyvinyl Alcohol/Phytic Acid/LiCl Hydrogel Electrolytes in High-Performance All-Solid-State Supercapacitors

The widespread adoption of flexible electronics has driven the development of all-solid-state energy storage materials. However, the limited single-functionality and unsatisfactory low-temperature tolerance of conventional hydrogel electrolytes remain critical challenges for wearable applications. Thus, a Cu@Fe3O4-PA...

Jun-Jie Liu, Jie Hu, Feng-Shuo He et al. · 0 citations
Sep 2026

A Multifunctional Waterborne Polyurethane-Based Flexible Wearable Sensor Integrating Self-Healing, Flame Retardancy, and Strain-Temperature Sensing with Adhesion, Self-Cleaning, and Antifouling Properties.

Waterborne polyurethane (WPU) is a promising material for flexible wearable sensors owing to its tunable structure, excellent mechanical properties, and facile multifunctionalization. However, compatibility issues between WPU and conductive components often limit the integration of additional functionalities, especiall...

Hao-Nan Chen, Wei-Ming Gong, Yu-Bin Zhang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.