Aug 2026· International Journal of Applied Mechanics· 0 citations
Abstract
Numerical simulation of hydraulic fracturing in horizontal shale gas and oil wells remains challenging, specifically leading to difficulties in modeling fracture width variations under proppant support. To address this, we present an integrated computational framework that explicitly accounts for proppantinduced reaction forces on fracture surfaces, which are coupled with fracture width through a robust iterative algorithm. The model synergistically combines a phase-field model for fracture propagation, a fluid flow model for proppant transport, and a fracture closure model. Validation against analytical solutions demonstrates that the predicted fracture length and width are in excellent agreement with theoretical expectations. The simulated proppant settling also agrees well with experimental observations. Numerical results demonstrate that the distribution of propped fracture width shows a significant difference compared to the distribution of fracture width before proppant settling. Additionally, we found that the propped fracture width is sensitive to slurry properties, such as injection rate, fluid viscosity, and proppant concentration, alongside the mechanical strength of the proppant. Crucially, proppant strength plays a significant role in sustaining fracture width during closure, which in turn has a substantial impact on long-term productivity. The presented model provides a new tool for fracturing design to enhance the conductivity of the hydraulic fractures.
Non-uniform proppant distribution across simultaneous multiple fractures significantly undermines the conductivity. Conventional models often focus on proppant transport inside the fracture, neglecting the critical role of wellbore in determining proppant division. To bridge this gap, this study utilizes a Eulerian–Lag...
Huan Peng, Jian Yang, Ze Li et al.· Processes· 0 citations
Proppant flowback during the posthydraulic fracturing flowback stage can induce instability of the internal proppant support structure and conductivity degradation within fractures, which are critical factors constraining long-term stable production of low-permeability tight oil and gas reservoirs. However, existing st...
To address the unclear fracture propagation behavior and the insufficient understanding of the influence mechanisms of fracturing parameters during the hydraulic fracturing of deep coalbed methane reservoirs in the Yan’an Gas Field, Well JY1 in the No. 8 coal seam of the Benxi Formation in Block N was selected as the s...
Proppant deposition changes the hydraulic resistance of connected fractures, while the resulting flow redistribution controls subsequent particle delivery. Resolving this feedback efficiently is important for evaluating field-scale proppant placement. This study develops an aperture-averaged model coupling suspended-pa...
Shale gas is a major unconventional energy resource in China. Its low porosity and permeability require large-scale volumetric fracturing to create conductive fracture networks. However, most induced fractures are propped discontinuously because shale reservoirs are geometrically complex. Fracture conductivity and prop...
Jianjun Wu, Ke Li, Haiou Zhao et al.· Processes· 0 citations
This study employs COMSOL Multiphysics to build a hydromechanical (HM) coupling model for shale gas production based on classic poroelasticity and Darcy’s law. Considering effective stress variation during depletion, a stress-dependent permeability model is incorporated into the dual-porosity framework. Numerical simul...