Skip to content
Open access

FPGA-Based Acceleration of a Multiscale Decision Fusion CNN for Radar-Based Object Classification

Sep 2026 · Electronics · 0 citations · 12 references

TL;DR

This paper presents the deployment and system-level characterization of an adopted multiscale decision fusion convolutional neural network (MDF-CNN) for radar-based object classification on the Xilinx Kria KR260 platform and compares two deployment configurations that differ in hardware, numerical precision, software runtime, and power-measurement boundary.

Abstract

The increasing use of unmanned aerial vehicles (UAVs) and other moving objects in civilian environments has created a growing need for reliable radar-based object classification systems, while deep learning (DL) models achieve high classification accuracy on range–Doppler (RD) radar data, their deployment on resource-constrained embedded platforms remains challenging due to computational and latency constraints. This work addresses that gap as a hardware–software co-design problem: the contribution is the system-level optimization and characterization of the deployment rather than the design of a new network architecture. This paper presents the deployment and system-level characterization of an adopted multiscale decision fusion convolutional neural network (MDF-CNN) for radar-based object classification on the Xilinx Kria KR260 platform. The network processes preprocessed stacked RD frames of size 11×61×3 and classifies targets into cars, drones, and people using the publicly available RDRD dataset. The Floating-Point (FP32) reference model achieves 97.06% classification accuracy. For efficient embedded deployment, the model is quantized to 8-bit integer (INT8) precision using the Vitis AI framework and executed on the deep learning processing unit (DPU). The INT8 FPGA (DPU) implementation achieves 96.88% accuracy with an average classifier-stage latency of 9.24 ms per preprocessed input tensor and a throughput of 108.21 inferences per second, corresponding to a 6.2× latency reduction relative to the FP32 central processing unit (CPU) baseline. The measured interval includes DPU execution and the tensor transfers between double data rate (DDR) memory and the DPU, but excludes radar acquisition, RD-map generation, target-centered cropping, temporal stacking, per-sample z-score normalization, and ARM-side INT8 input scaling. At fixed INT8 precision, the INT8 CPU implementation achieved a lower raw latency of 7.957 ms per preprocessed input tensor compared with 9.24 ms for the DPU. Power measurements show an average consumption of 4.14 W, resulting in an energy cost of 38.25 mJ per classifier inference. These figures compare two deployment configurations that differ in hardware, numerical precision, software runtime, and power-measurement boundary, and are therefore reported as a system-level comparison rather than as an attribution to any single factor. These results characterize low-latency and energy-efficient deployed MDF-CNN classifier execution on the KR260 using preprocessed radar tensors; investigation of the implementation and timing of the complete online radar-to-classification pipeline remain directions for future work.

Read PDF

Similar papers

Open access Sep 2026

Deep Learning-Based Classification of Military Aircraft Types from Satellite Imagery

Automatic classification of military aircraft in satellite imagery is a challenging problem with a high risk of error due to the limited pixel area of targets, variations in image resolution and illumination conditions, background complexity, and strong visual similarity among classes. In this study, a deep learning ap...

Fahrettin Varlik, Cüneyt Özdemir · 0 citations
Open access 2026

Aircraft Classification Using Convolutional Neural Networks on RCS Data and ISAR Images

This article addresses the problem of aircraft classification by utilizing deep learning on radar signatures. This study uniquely leverages both radar cross section (RCS) data and inverse synthetic aperture radar (ISAR) images as inputs to a convolutional neural network (CNN), using a tool (GEMIS) developed by our grou...

Diego Paramés, A. Del Barrio, David Cabornero et al. · 0 citations
Open access Sep 2026

Lightweight Deep Learning Framework for UAV Object Detection Using Adaptive Multi-Scale Feature Fusion

UAV imagery contains many small and densely distributed objects whose apparent scale changes sharply with altitude and viewpoint. This study defines an architecture framework for lightweight UAV object detection that combines a nano-scale one-stage detector, a high-resolution P2 branch, and an Adaptive Multi-Scale Feat...

Yi-Fei Gao, Shen Dong · 0 citations
Conference Sep 2026

MF-YOLOv8-based fine-grained detection of UAVs and birds for low-altitude security

Aiming at the problem of false positives and missed detections induced by variable scales and similar textures between unmanned aerial vehicle (UAV) and bird targets in low-altitude security defense, existing detection models can hardly balance accuracy and real-time performance requirements. This paper proposes an MF-...

Xing-Le Zhang, Wan-Ting Jin, Rong-Xiang Zhao et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.