Skip to content

Concurrent Optimization of Morphology Design and PID Control for Running Robots on Unstructured Terrains

Aug 2026 · Journal of Mechanisms and Robotics · Vol 18 · 0 citations

TL;DR

This paper introduces an optimization formulation and solution framework that concurrently designs the physical system (morphology) and controllers for small-scale robots that are abstracted as torque-driven spring-loaded inverted pendulums (TD-SLIP).

Abstract

Designing legged robots for running in complex, unstructured environments requires systematic formulations of heterogeneous, multi-domain constraints and variables, including component choices, geometric choices, controller profiles, and touchdown conditions, which remains underexplored for small-scale (10-500 g) legged robots. At these scales, identifying feasible and robust running solutions becomes increasingly difficult—especially on rough terrain—due to limitations in physical parameters, reduced sensing capabilities, lack of a priori terrain knowledge, and limited onboard computing. This paper introduces an optimization formulation and solution framework that concurrently designs the physical system (morphology) and controllers for small-scale robots that are abstracted as torque-driven spring-loaded inverted pendulums (TD-SLIP). A set of constraints is defined to promote a symmetric gait, bounding touchdown conditions and vertical/horizontal displacements, which, along with the objective function, promote a greater number of gait cycles. Motion control is achieved with a combination of optimally tuned PID control of the stance phase and optimizing the motor-actuation-period for the flight phase. Optimization is performed using a standard mixed-discrete Particle Swarm Optimization algorithm. The optimized design on flat terrain achieved 19 stable gait cycles. Initializing with the flat terrain optimized design is found to be uniquely helpful in driving the optimization search over the design space for rough terrain, while achieving at least 14% better performance compared to the flat terrain design. Evaluated over a large set of unseen rough terrains, the optimized designs demonstrate stable gaits with 8 or more cycles in most cases.

View source

Similar papers

Sep 2026

Proprioceptive-based terrain-adaptive rolling control for wheeled-quadruped robots

This paper presents a proprioception-based rolling control framework for wheeled-quadruped robots. The proposed framework serves as a reactive control approach for adaptive terrain traversal and body stabilization, without explicit motion planning. For wheeled-quadruped robots, adding wheels significantly increases t...

Shi-Chao Zhou, Zhong-Qu Xie, Ling-Kun Chen et al. · 0 citations
Open access Sep 2026

DESIGN AND CONTROL OF A SIX-LEGGED SPIDER ROBOT FOR ENHANCED MOBILITY AND ADAPTABILITY

Spider robots are widely preferred due to their superior mobility enabled by multi-legged structures and articulated joints, which allow effective locomotion on uneven terrain and obstacle negotiation. However, the mechanical complexity of legged systems may lead to limited payload capacity, a high number of moving par...

Yusuf Bolat, Hüseyin Ömerbaşoğlu, Merdan Özkahraman et al. · 0 citations
Sep 2026

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

A systematic optimization framework for task-oriented co-design of actuator hardware and control is presented, combining discrete enumeration with continuous search over dimensions and real-valued indices and demonstrates a systematic route from task requirements to actuator design and control.

Xuan-Yu Huang, Jia Dong, Hang Zhao · 0 citations
Preprint Sep 2026

Optimized Wrench Polytope Analysis for Real-Time Stability Control of Legged Robots in Complex Multi-Contact Configurations

Legged robots offer a variety of automation applications in real-world scenarios. But areas that are difficult to traverse, like slopes, caves, or scaffolding, still pose a great challenge for traversal. To tackle this problem, we propose an optimized algorithm for evaluating the full actuatable wrench polytope for arb...

Friedrich Graaf, Elias Birkefeld, Christian Eichmann et al. · 0 citations
Preprint Sep 2026

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller...

Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.