Aug 2026· Everest Advances in Science and Technology· Vol 2, pp. 93-110· 0 citations
Abstract
For a developing country like Nepal, the massive increase in amount of plastic waste and agricultural leftovers has created serious environmental issues. This study focuses on the development of plastic-sand composite bricks, using low-density polyethylene (LDPE) plastic as a binding material and sand as the aggregate. The control mix of plastic and sand only as well as the modified composites using rice husk, rice husk ash, and rice husk biochar were prepared as partial replacement of sand to study the change in material properties. Laboratory scale samples having dimensions of 100 × 50 × 50 mm were fabricated using a mix ratio of 30:70 (plastic to sand) by weight, with 10% replacement of sand by agricultural derivatives for additive based samples. The fabricated composite material was tested for their compressive strength, water absorption, and physical properties, and FTIR analysis. The highest average compressive strength of 19.34 MPa was shown by rice husk ash sample. Raw rice husk sample had the lowest average value of 15.56 MPa. The rice husk biochar sample showed moderate performance with strength of 17.07 MPa. FTIR analysis confirmed that bonding in the composite is mainly physical. This study shows that LDPE-Sand composites with suitable agricultural additives can work as sustainable construction materials and helps to promote effective waste utilization.
The increasing consumption of plastic and its long decomposition period necessitate innovative strategies for utilizing PET plastic waste in civil engineering applications, particularly through its conversion into artificial coarse aggregates for concrete. This study investigates the effect of rice husk ash (RHA) finen...
D. Nurtanto, K. A. Wiswamitra, Mohamad Fikri Nurhidayat et al.· Challenge Journal of Concret...· 0 citations
The rapid increase in accumulation of plastic waste created a major environmental challenge due to the non-biodegradable nature of plastics. One of the most commonly used plastics among them is the High-Density Polyethylene (HDPE), used for bottles, containers and plastic packaging, which has generated a huge amount of...
R. Karthigeyan, A. Kumar· Frontiers in Built Environme...· 0 citations
In order to improve the mechanical strength of cement soil while reducing the environmental hazards associated with the disposal of steel slag (SS) and rice husk, this study investigates the effects of SS (with addition ratios of 0%, 5%, 10%, 15%, and 20% by dry soil mass) and rice husk biochar (RHB) (with addition rat...
Abstract This study aims to develop low-density sustainable composites by incorporating hemp fiber, rice husk, and glass fiber reinforced plastic (GRP) pipe waste obtained from industrial pipe cutting waste into an epoxy matrix. The effects of material ratios and matrix type on physical, mechanical, strength, and therm...
The use of recycled agricultural and industrial by-products as partial cement replacements may reduce cement consumption and associated environmental impacts. This study investigates the effects of replacing cement with rice husk ash (RHA), fly ash (FA), glass powder (GP), and ground granulated blast furnace slag (GGBF...