Aug 2026· Italian National Conference on Sensors· Vol 26, pp. 5217· 0 citations· 68 references
Medicine
TL;DR
The findings indicate that integrating patient-specific information with RL-based adaptive control can significantly enhance robustness, tracking performance, and personalisation in exoskeleton-assisted gait rehabilitation, providing a promising direction for future intelligent rehabilitation systems.
Abstract
Lower-limb rehabilitation exoskeletons have the potential to improve gait recovery after stroke by providing intensive and repetitive training. However, conventional control strategies often rely on fixed control parameters and exhibit limited adaptability to patient-specific characteristics, sensor noise, and dynamic uncertainties. This paper proposes an adaptive control framework that combines deep reinforcement learning (RL) with model-based impedance control for personalised lower-limb exoskeleton assistance. Patient-specific biological parameters are incorporated into the simulation environment and reward formulation to improve adaptability and robustness. Three state-of-the-art deep RL algorithms, Deep Deterministic Policy Gradient (DDPG), Twin Delayed Deep Deterministic Policy Gradient (TD3), and Soft Actor-Critic (SAC), are evaluated in a continuous control environment under varying signal-to-noise ratio (SNR) conditions ranging from 5 dB to noise-free conditions. Results demonstrate that TD3 achieves the most stable learning performance, obtaining a mean reward of −354.24 under noise-free conditions, while DDPG provides the highest joint-angle tracking accuracy with an RMSE of 0.0369 rad. SAC exhibits superior robustness in noisy environments, achieving the highest learning ratio of 0.51 at 5 dB SNR. Furthermore, the proposed personalised framework reduces tracking errors by up to 27% compared with non-personalised baseline approaches. The findings indicate that integrating patient-specific information with RL-based adaptive control can significantly enhance robustness, tracking performance, and personalisation in exoskeleton-assisted gait rehabilitation, providing a promising direction for future intelligent rehabilitation systems.
Results demonstrate that DRL-based methods, particularly when combined with traditional controllers, improve both force reduction and motion stability over conventional control strategies.
Mohammad Sahandi, G. Vossoughi, H. Zohoor et al.· IEEE Access· 0 citations
Lower limb exoskeletons and mobile robots hold great potential in improving motor function rehabilitation for patients with limb dysfunction. However, their widespread application is limited by the substantial time and effort investment required from professional rehabilitation therapists. A significant challenge in ac...
Wei-Tian He, Xinhao Zhang, Qin-Chen Yang et al.· IEEE Transactions on Automat...· 0 citations
The proposed BS–ST-SMC architecture outperforms classical and traditional robust approaches, particularly in mitigating chattering and managing human–robot interaction uncertainties, particularly in mitigating chattering and managing human–robot interaction uncertainties.
Yukio Rosales-Luengas, Sergio Salazar, Saúl J. Rangel-Popoca et al.· Electronics· 0 citations
This work verifies that biomechanics-integrated heterogeneous MARL can learn robust, speed-adaptive assistance policies in simulation, offering a scalable pathway to accelerate exoskeleton controller development and address long-standing industry challenges.
Lei Sun, Hui Li, Ao-Fei Deng et al.· Medical and Biological Engin...· 0 citations
Accurate dynamic parameters are required for model-based control of lower-limb exoskeletons, but limited excitation, transmission friction, and assembly-dependent uncertainty can degrade conventional estimates. This study examines a two-stage method that combines recursive least squares (RLS) with an adaptive grey wolf...
Wentao Sheng, Yun-Xia Cao, Li Ding et al.· Actuators· 0 citations
Home-based rehabilitation exoskeletons often suffer from control instability due to low-cost force sensors. This paper presents a robust, sensorless Composite Variable Impedance Control architecture that separates trajectory tracking (virtual stiffness K) from active assistance (adaptive feedforward torque τassist). By...
Jun Leng, Pengcheng Li, Hanze Wang et al.· 2026 IEEE International Conf...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.