Evolution of Hydraulic Conductivity and Identification of Apparent Seepage-Transition Hydraulic Gradients in Graded Sandy Soils Under Staged Upward Seepage
Abstract
Staged upward seepage can trigger particle migration and pore-structure adjustment in graded sandy soils, but the resulting transition behavior remains difficult to identify quantitatively. In this study, three representative sandy soils from a deep overburden deposit in southeastern Tibet were tested using a laboratory vertical upward seepage apparatus. Eight specimens with different nominal preparation states were subjected to stepwise increases in hydraulic head difference. Local hydraulic gradient, seepage velocity, hydraulic conductivity, and macroscopic outflow phenomena were monitored. Apparent seepage-transition hydraulic gradients were identified by combining abrupt changes in k–i curves, conductivity ratios between eligible staged records, and observed seepage responses. The clearest transition occurred in the nominal loose specimen of Soil 2, where the temperature-corrected hydraulic conductivity k20 increased from 1.76 × 10−3 to 2.25 × 10−2 cm s−1 as i increased from 0.20 to 0.25, giving k20,2/k20,1 = 12.80 and ic = 0.225. A clear transition was also identified for the nominal dense specimen of Soil 3, with k20,2/k20,1 = 6.61 and ic = 0.583. Clear transitions were identified in the tested specimens only for Groups D and H, whereas the remaining specimens showed weak or phenomenon-assisted responses, local high-gradient fluctuations, or anomalous loading-path records rather than uniformly identifiable transition points. These results show that apparent transition gradients are path-dependent and should be evaluated together with loading history, seepage-velocity evolution, conductivity ratios, and macroscopic observations.