Broad-Sieved Low-Density Proppant: Unique Transport Properties and Improved EUR in Vertical Re-Fractures and Horizontal Completions
Abstract
Hydraulic-fracture design has traditionally emphasized fracture creation and proppant pack conductivity; however, field experience increasingly indicates that only a portion of the created fracture network remains effectively propped and hydraulically connected after closure. This paper evaluates an engineered low-density polycolloidal (LDPC) proppant as a transport and placement system intended to increase the area extent of durable fracture connectivity. The material combines lower particle density (< 2.65 SG), high sphericity, broad particle-size distribution, mechanical strength, and low-yield-stress slurry behavior. Laboratory characterization, rheology, settling and suspension testing, conductivity measurements, flow-wall experiments, and years of field application results are used to compare LDPC behavior with conventional 100-mesh sand and to evaluate transport through primary, branching, and previously propped fracture pathways. Measured properties are incorporated into fracture and reservoir models to assess changes in predicted propped geometry and conductivity distribution. Field performance is evaluated across vertical wells, re-fractures, multistage horizontal completions, and multiple reservoir types, including a same-pad, zipper-fractured horizontal-well comparison between an LDPC dirty-pad design followed by 100-mesh sand and a conventional sand-only offset. Long-term production, treating-pressure behavior, ISIP, and operational repeatability are examined as complementary indicators of treatment effectiveness. Results are interpreted within the broader concept of Effective Hydraulic Connectivity, defined as the portion of the created fracture system that remains hydraulically connected to the wellbore after treatment and closure. The study challenges fracture optimization based solely on maximizing localized planar frac conductivity and evaluates whether distributing sufficient conductivity across a larger connected fracture network can provide a more effective stimulation with higher productivity and estimated ultimate recovery (EUR).