Skip to content
Conference

A tapped-delay-line calibration method based on intelligent optimization algorithms

Sep 2026 · Global Intelligent Industry Conference · Vol 14322, pp. 143223E - 143223E-10 · 0 citations · 34 references
Engineering

TL;DR

An intelligent, computation-driven calibration method that enhances TDL linearity by re-tapping the delay line by employing offline optimization algorithms to determine re-tapping positions, which reduces integral nonlinearity (INL) and differential nonlinearity (DNL) by more than 70% and 50%, respectively, compared to similar methods.

Abstract

The tapped-delay-line (TDL) structure is a widely adopted approach in FPGA-based time-to-digital converters (TDCs). Ideally, all delay units in a TDL should have uniform delay times, but in practice, various factors cause significant deviations. These deviations degrade the TDC’s linearity and precision. Existing solutions typically involve individually calibrating each delay unit, which increases FPGA resource usage and complexity—often restricting their applicability. This paper introduces an intelligent, computation-driven calibration method that enhances TDL linearity by re-tapping the delay line. By employing offline optimization algorithms to determine re-tapping positions, this method avoids additional FPGA resources or structural changes. It also supports reconfigurable resolution. Experimental results show that our method reduces integral nonlinearity (INL) and differential nonlinearity (DNL) by more than 70% and 50%, respectively, compared to similar methods. This flexible calibration strategy can be applied to a wide range of TDL-TDC configurations, extending their applicability and improving overall performance.

View source

Similar papers

Open access Oct 2026

A High-Accuracy Delay-Tap Calibration Method for 100 MHz Time-Mode Signal Processing

In this paper, a calibration technique for unity delay taps suitable for 100 MHz time-mode signal processing is proposed. The delay tap is based on the constant slope discharging capacitor concept which is used in time-mode signal processing building blocks. The proposed topology calibrates the impact of process, volta...

Aikaterini I. Chronopoulou, Konstantinos P. Pagkalos, V. Kalenteridis et al. · 0 citations
Review Open access Oct 2026

Advances in Inter-Channel Mismatch Calibration for Time-Interleaved Analog-to-Digital Converters: A Review

Time-interleaved analog-to-digital converters (TIADCs) increase the aggregate sampling rate by distributing conversion across several lower-rate channels. However, differences in channel offset, gain, and sampling instant introduce periodic spurs and limit the dynamic performance obtainable from interleaving. This revi...

Zhen-Dong Wang · 0 citations
Conference Sep 2026

A novel timing skew calibration method based on autocorrelation function for time-interleaved ADCs

A novel timing skew calibration method using autocorrelation function is proposed, with adaptive calibration sequences introduced for four-channel and multi-channel TI-ADCs. For four-channel systems, the channel with the largest deviation of one iteration step is adjusted by the method in 99% of cases. For multi-channe...

Jia-Yu Guo, Di Wang, Peng Miao et al. · 0 citations
Open access 2021

TWO-STEP TDC CMOS RESOLUTION WITH BUILT-IN COARSE GAIN CALIBRATION BY PULSE-SHRINKING FINE STAGE

This article proposes a computerized converter (TDC) solution that can meet a broad range of knowledge and fine-time goals at the same time. The proposed TDC utilizes a beat contracting (PS) plot for a precise target and two-advance (TS) engineering for a larger range in the second phase. The suggested PS TDC solves th...

Ranganahan, Edara Krishna Reddy, Shiva Subramanian et al. · 0 citations
Open access Oct 2026

Hybrid Delay Alignment Techniques for Low-Area Wideband Continuous-Time Pipelined ADCs

This paper describes a continuous-time pipelined (CTP) ADC featuring two hybrid delay alignment techniques: the all-pass filter (APF) + high-pass filter (HPF) and the all-pass filter + finite-impulse-response (FIR) filter hybrid delay alignment techniques. The APF+HPF hybrid delay alignment technique significantly supp...

Yuxuan He, He-Yang Zhao, Yun-Song Tao et al. · 0 citations
Open access 2021

RESOLUTION TWO-STEP TDC CMOS BY PULSE-SHRINKING FINE STAGE, BUILT-IN COARSE GAIN CALIBRATION

This article proposes a computerized converter (TDC) solution that can meet a broad range of knowledge and fine-time goals at the same time. The proposed TDC utilizes a beat contracting (PS) plot for a precise target and two-advance (TS)engineering for a larger range in the second phase. The suggested PS TDC solves the...

K.shravan Kumar, K. Mounika, T.veera Babu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.