Oct 2026· Proceedings of the Institution of mechanical engineers. Part E, journal of process mechanical engineering· 0 citations· 30 references
Abstract
Soft robotic grippers are uniquely suited for handling fragile objects, yet reliable contact-state awareness remains challenging due to sensor noise, signal drift, and limited interpretability of current approaches. This study presents an interpretable two-stage analytical pipeline for contact estimation of a pneumatic soft gripper using low-cost commercial flex sensors embedded within an endoskeleton-reinforced PneuNet structure. The pipeline first establishes pressure–bending relationships through sigmoidal modelling of single-finger mechanics, delineating free bending, initial contact, and full engagement (blocking). A multi-finger comparative analysis then uses differences in transition pressures and bending trajectories among fingers to infer object geometry and detect abnormal grasp behavior. Evaluated across 10 objects; spherical, cylindrical, asymmetric, delicate, and miniature; symmetrical objects synchronized, while irregular objects showed staggered finger engagement. The sigmoidal model achieved a mean R
2
= 0.94 across blocking positions. The gripper achieved an 80% grasp success rate across 10 diverse objects and a 650 g payload capacity. Comparing bending trajectories further detects yielding (in delicate objects) during grasping. By combining physically interpretable modelling with lightweight signal processing, the proposed approach achieves contact-state estimation using cost-effective sensing hardware without custom tactile arrays, training data, or computationally intensive models. This work offers a practical pathway toward low-cost sensing solutions for soft robotic manipulation in industrial applications.
Pneumatic soft grippers adapt to uncertain object geometry through compliant deformation, and their performance is governed by chamber geometry, material behavior, pneumatic routing, and pressure control. This study develops a modular soft-finger gripper and a common-pressure-control platform. A toothed, multi-chamber...
Liang Wang, Ye-Ming Zhang, Mao-Lin Cai et al.· Actuators· 0 citations
Soft pneumatic grippers show immense promise in grasping fragile, irregular, and unknown objects; however, simultaneously achieving high payload capacity and grasping flexibility under low actuation pressure remains a critical challenge. In this paper, we propose a low-pressure dual-mode pneumatic soft gripper, which...
. Pneumatic soft grippers have attracted considerable attention because their intrinsic compliance enables the safe manipulation of fragile and irregularly shaped objects. However, their practical performance remains constrained by challenges in structural design, proprioceptive and tactile perception, and closed-loop...
De-Qiu Kong, Xuan-Ming Zhang· Proceedings of the 3rd Inter...· 0 citations
The use of soft robotic end-effectors has been prevalent in sensitive agricultural harvesting because these devices have high compliance and are safe to interact with humans. Current variable-stiffness grippers have the disadvantages of full-finger uniform stiffness parameters and discrete-grade parameter control, whic...
Yi-Xuan Wei· Applied and Computational En...· 0 citations
In-hand manipulation of ultra-soft objects is challenging due to their high deformability. Conventional vision-based tactile sensors (VBTSs) with reflective coatings often fail to detect contact signals from ultra-soft items like sponges, since the sensing material is stiffer than the object itself, resulting in insuff...
Zhi-Tong Liu, Xin Jiang· IEEE Robotics and Automation...· 0 citations
Soft robots adapt to object shapes through structural compliance; wrapping actuators generate gripping force through continuous enveloping contact. This study presents a vacuum-driven pneumatic helical spring (PHS) actuator and a simplified analytical model linking manufacturing constraints, free shape, gripping force,...