Passivation of Perovskite Absorber via Interface Engineering for Improved Short‐Term Moisture Tolerance in Solar Cells
Abstract
The exceptional light harvesting properties of perovskite solar cells (PSCs) within a short decade timeframe have been truly remarkable, but long‐term stability under operational conditions, however, is an area that still presents challenges. Reduced performance from exposure of the solar cell stack to elevated temperatures, high humidity, and other environmental factors presents opportunities for continued research in order to understand degradation pathways. While studies on the intrinsic perovskite absorber stability have been conducted previously, here we assess the role of interfacial engineering between the perovskite absorber, specifically the Cs 0.05 FA 0.79 MA 0.16 PbI 2.45 Br 0.55 formulation, and the overlying hole transport layer (HTL), in influencing the short‐term device response under controlled humidity exposure. The interfacial layers include three families, namely organic poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine] (PTAA), organic poly({4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl}{3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7), and inorganic two‐dimensional (2D) tungsten diselenide (WSe 2 ), sandwiched between the absorber and the conventional HTL spiro‐OMeTAD. PTB7‐ and WSe 2 ‐interfaced devices showed improved short‐term humidity tolerance, with WSe 2 exhibiting the highest performance retention among the tested configurations. Our current findings provide a stepping stone for further studies to emphasize the importance of interfacial engineering with new and emerging materials for helping enhance robustness of perovskite solar cells in moisture‐rich environments.