Skip to content
Open access

Intelligent Optimization of FDM Process Parameters for PLA/MWCNT Composites Using Taguchi and Random Forest Models

Sep 2026 · Journal of Intelligent Decision Making and Information Science · 0 citations · 18 references

Abstract

FDM (Fused Deposition Modelling) has become one of the most popular technologies of additive manufacturing, which allows producing lightweight parts made of polymers with unique shapes and internal structure. At the same time, the mechanical characteristics of FDM parts largely depend on the material composition and the parameters of 3D printing, thus optimizing the tensile strength becomes an important task. The aim of this study is to optimize the tensile characteristics of polylactic acid (PLA) strengthened by multi-walled carbon nanotubes (MW-CNT) by exploring the influence of infill density, layer height and nozzle temperature while using the same Tri-Hexagon infill. Three variants of composite compositions containing 0.4 wt.%, 0.8 wt.% and 1.2 wt.% MW-CNT were considered to find the optimal printing parameters. An experimental plan based on the Taguchi L9 orthogonal array was used in order to minimize the number of tests and systematically analyze the influence of three 3D printing parameters with three levels each. In total, 27 tensile samples were produced using an Anycubic Kobra 2 Neo FDM printer and tested using ASTM D638 tensile testing standard. The obtained experimental data were analyzed using signal-to-noise ratio, regression, analysis of variance and Random Forest machine learning for tensile strength. The findings confirmed that the highest value of tensile strength of 29.95 MPa was obtained using the PLA+0.8 wt.% MW-CNT composite with 90% infill density, layer height of 0.18 mm and temperature of 210°C. The results from analysis of variance showed that infill density is the most important factor and contributed to 88.18-92.19% variations in tensile strength for all types of materials. In addition, the Random Forest model had the best prediction performance with test R² of 0.595. This research has confirmed that optimizing infill density is the best method for improving the tensile properties of PLA/MW-CNT composites.

Read PDF

Similar papers

Open access Sep 2026

Materials Informatics-Assisted Optimisation and Random Forest Prediction of Mechanical Properties in FDM-Printed PLA/MWCNT Nanocomposites

Additive manufacturing has become one of the mainstream manufacturing technologies for producing polymer components with complex geometries and high material utilisation. Among various additive manufacturing technologies, fused deposition modelling (FDM) is widely applied due to its strong adaptability and low cost. Ho...

A. Kolekar · 0 citations
Oct 2026

OPTIMIZATION OF THE FFF PROCESS PARAMETERS ON COMPRESSIVE STRENGTH OF nGr-PLA COMPOSITE USING TAGUCHI DOE

Polylactic acid (PLA) has numerous potential applications due to its ability to biodegrade and its generally harmless decomposition process. A composite material consisting of PLA and 4.5% by weight of nanographene is employed in a 3D printer. The composite is processed into wires through a screw-type extrusion machine...

Sumit Singh, Shefali Trivedi, R. Attri · 0 citations
Sep 2026

Optimization of extrusion-based 3D printing process for sustainable manufacturing

The development of additive manufacturing (AM) has gained popularity with the advent of new products featuring tailored lattice structures. Products with different lattice structures exhibit distinctive properties that meet the requirements of specific applications across various industries. Extrusion-based 3D printing...

A. Sahu, J. Netto, Marco Leite et al. · 0 citations
Open access Sep 2026

Simultaneous Optimization of Manufacturing Variables for 3D-Printed PETG Prototypes Leveraging Taguchi-Coupled Grey Relational Approach

This study investigates the optimization of Fused Deposition Modeling (FDM) parameters for Polyethylene Terephthalate Glycol (PETG) a material widely utilized in clinical and biomedical applications due to its favorable combination of lightweight properties, durability, and versatility. By applying a Grey-Taguchi metho...

Abera Anebo, Temesgen Abebe, D. Sinha · 0 citations
Open access Oct 2026

Modifying the Mechanical Property of PLA-Carbon Fiber Composite Fabricated by FDM Via Adjusting Process Parameters and Heat Treatment

Fused deposition modeling (FDM) has become one of the most widely used additive manufacturing technologies, while polylactic acid reinforced by short carbon fibers (PLA-CF) is increasingly applied in structural components. However, the mechanical properties of FDM-printed parts are strongly affected by printing paramet...

Yu-Chao Bai, Yi-Han Xiao, Yi-Lin Wang et al. · 0 citations
Open access Sep 2026

Multi-Response Optimization of FDM Process Parameters for Enhanced Mechanical Performance and Reduced Weight of PLA and PLA-CF 3D-Printed Parts

This work investigates the influence of fused deposition modeling (FDM) parameters on the tensile properties and material consumption of FDM-printed samples. The study focused on extrusion-related parameters that directly govern material deposition during FDM printing, including extrusion temperature (ET), layer thickn...

Mustafa Saleh · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.