Non-Contact Image-Based Roughness Estimation of Drilled Holes: Imaging Setup, Ground-Truth Dataset and Leakage-Free Evaluation of GLCM and Wavelet Features
Oct 2026· Engineer· Vol 7, pp. 544· 0 citations· 39 references
Abstract
Surface roughness (Ra) of drilled hole walls is difficult to measure non-destructively because the recessed surface is inaccessible to a stylus unless the workpiece is sectioned. This study presents an imaging rig and a stylus ground-truth procedure for 150 holes (4–9 mm) drilled in Al-7075, and evaluates whether gray-level co-occurrence matrix (GLCM), first-order and wavelet features from grayscale hole-wall images, together with spindle speed and feed rate, can estimate Ra using support vector regression (SVR) with and without mutual information feature selection. Two evaluation schemes were compared: an image-level split of 900 augmented images, and hole-level cross-validation in which all images of a hole are kept together and tests use original images of unseen holes. The image-level split gave R2 = 0.80, whereas hole-level cross-validation gave R2 between −0.04 and 0.08 for all feature sets, showing that image-level splitting overstates performance for this kind of data. Flips left the features unchanged, whereas noise injection and 90° rotation altered them and their correlation with Ra. The work provides a reproducible acquisition and ground-truth procedure, a 150-hole dataset and an evaluation protocol for image-based roughness estimation of drilled holes, and identifies the data and imaging conditions needed for estimation on unseen holes.
A Streamlit-based interface enables real-time, non-contact prediction at ~45 ms per image, reducing inspection time, cost, and reliance on contact methods.
Shilpa Karegoudra, V. Yendapalli· Engineering, Technology &...· 0 citations
Time-of-flight diffraction (TOFD) images contain small defect indications and strong geometric signals that complicate automated interpretation. This study evaluates a lightweight segmentation configuration using seven observed classes: background, four defect-indication categories, head wave, and bottom signal. Eight...
Shot peening is a common process for surface strengthening and residual-stress conditioning of metal parts, and the number, size, and spatial distribution of the resulting pits are key indicators of peening quality. On metal surfaces that combine strong directional machining texture with high specular reflectance, the...
Ji Li, Xue-Ting He, Xiao-Bo Chen· Conference on Advanced Algor...· 0 citations
To address the low efficiency and operator dependence inherent in traditional methods for measuring asphalt pavement mean texture depth (MTD), this paper proposes a digital evaluation method based on three-dimensional (3D) point-cloud data. Pavement point clouds are acquired using a self-developed binocular vision syst...
Two freely available, open-source platforms are examined that together provide comprehensive non-contact 2D measurement of planar mechanical components: Python OpenCV, which enables camera calibration, homography-based planar reconstruction, adaptive Gaussian thresholding for metallic surfaces, and sub-pixel edge detec...
Rohan R. Ozarkar· International Journal of Ele...· 0 citations
Purpose: Fine-grained pavement crack segmentation remains challenging because cracks generally occupy a small proportion of pavement images and exhibit thin, irregular, and low-contrast structures. These characteristics create severe pixel-level class imbalance and may reduce the stability of conventional U-Net predict...
Oktavian Andi Cahya Nugraha, G. F. Shidik, Catur Supriyanto· Scientific Journal of Inform...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.