Skip to content
Open access

Thermomechanical Behavior of Phosphogypsum Composites Reinforced with Olive and Eucalyptus Wood Chips

Sep 2026 · Journal of Manufacturing and Materials Processing · Vol 10, pp. 349 · 0 citations · 33 references

Abstract

This study explores the development of sustainable composite materials based on phosphogypsum (PG), an abundant industrial by-product, reinforced with olive and eucalyptus wood chips. The objective is to valorize waste streams while enhancing the mechanical, thermal, and acoustic performance of the base material for eco-efficient construction applications. Composites were prepared with fiber contents of 5%, 10%, 15%, and 20% and evaluated through standardized experimental tests. Mechanical behavior was assessed via three-point bending tests, revealing a 26% improvement in flexural strength at 15% eucalyptus content. Water absorption increased with fiber content but remained lower in eucalyptus-reinforced composites due to better fiber–matrix cohesion. Thermal conductivity decreased significantly from 5% to 20% fiber content, reaching 0.60 W/m·K at 20% eucalyptus content, indicating enhanced insulation potential. Acoustic tests, performed using an impedance tube in accordance with ISO 10534-2, showed strong frequency-dependent absorption. The 20% olive composite achieved a peak absorption coefficient of 0.78 and an NRC of 0.68, demonstrating excellent sound-damping characteristics. This work introduces a novel integration of two underutilized Mediterranean biomasses into PG matrices and highlights their multifunctional benefits. The resulting composites offer a low-cost, low-carbon solution for thermally and acoustically optimized building components, advancing circular economy principles in the construction sector.

Read PDF

Similar papers

Sep 2026

Mechanical and thermal characterization of sustainable Murraya koenigii/Syzygium cumini reinforced polymer hybrid composites

The use of organic fiber-reinforced polymer composites is growing fast owing to their sustainable, low-density, and eco-friendly nature. The present investigation was carried out to study the mechanical and thermal properties of hybrid epoxy composites reinforced with Murraya koenigii ( M. koenigii) fibers and fi...

Chintha Rajendraprasad, M. Reddigari · 0 citations
Oct 2026

Influence of hybrid lignocellulosic fillers on processing, microstructure, mechanical and thermal behavior of kenaf/epoxy composites

The large-scale generation of agricultural residues such as pine needle (PN) and citrus peel waste poses environmental and disposal challenges. This study investigates the valorization of these lignocellulosic wastes as hybrid bio-fillers in kenaf fiber-reinforced epoxy composites, establishing a sustainable waste-to-m...

Sauveer Kumar, Hitesh Sharma · 0 citations
Open access Sep 2026

Microstructural Evolution and Property Enhancement of Teak (Tectona grandis) Wood Dust Reinforced Polymer Composites for Automotive Applications

The increasing demand for lightweight and sustainable materials in the automotive sector has intensified research on hybrid natural-synthetic fiber composites. In this study, teak wood dust was explored as an eco-friendly particulate reinforcement for glass fiber/epoxy laminates to enhance structural performance while...

Narasimharajan Mani, Dinesch Subbiah, Karthick Pannerselvam et al. · 0 citations
Sep 2026

Fabrication and processing of biochar basalt epoxy composites

ABSTRACT The impact of rice husk biochar on basalt fiber reinforced epoxy composites under mechanical, thermal, and hygrothermal aging conditions is examined in this work. The hand lay-up method was used to create composites with 0–7 weight percent biochar. Mechanical characterization found that the composite containin...

Adarsh Chaurasiya, R. S. Rana · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.