Oct 2026· ACS Applied Electronic Materials· 0 citations· 38 references
Abstract
Rapid advances in wearable human–machine interaction (HMI) and internet of things (IoT) systems are severely limited by the short service life, poor mechanical conformability, and environmental drawbacks of conventional battery-powered sensing devices. Triboelectric nanogenerators (TENGs) offer a compelling self-powered sensing alternative, yet real-world deployment is hindered by insufficient surface charge density and inadequate mechanical compliance of prevailing polymer friction layers. Herein, we adopt a facile sacrificial salt template strategy to fabricate flexible, three-dimensionally interconnected porous polydimethylsiloxane/strontium titanate (PDMS/SrTiO3) composite films for simultaneously boosting triboelectric output performance and mechanical compliance. The interconnected porous architecture greatly enlarges the effective contact area and improves elastic deformability of the active layer, while uniformly dispersed high-dielectric SrTiO3 nanoparticles reinforce dielectric polarization and interfacial charge retention. The optimized dual-structured TENG (DS-TENG) delivers a peak open-circuit voltage (VOC) of 178 V and a maximum power density of 450 mW/m2, retaining stable electrical stability over 20,000 continuous contact-separation cycles. Leveraging the high signal fidelity of DS-TENG, we demonstrate a wearable self-powered Morse code communication system, which encodes all 26 Latin alphabet letters from finger flexion-derived electrical signals. Furthermore, a five-channel DS-TENG sensor array integrated with continuous wavelet transform (CWT) and squeeze-and-excitation convolutional neural network (SE-CNN) achieves 92% training accuracy and 87% validation accuracy for recognizing ten complex numeric hand gestures. This work establishes an integrated self-powered sensing framework that bridges material–interface engineering with deterministic information encoding and data-driven gesture recognition, providing a feasible route toward practical wearable human–machine interaction hardware.
Triboelectric nanogenerators (TENGs) provide a promising route toward self-powered wearable sensors by converting low-frequency human motion into electrical signals. However, the practical use of soft polymer TENGs in human-machine interfaces remains limited by inefficient contact formation, low charge density, and res...
Wearable triboelectric nanogenerators require not only high electrical output but also mechanical compliance, elastic recovery, and long-term operational stability. Here, we report a multiscale-engineered porous triboelectric nanogenerator based on sugar-templated PDMS integrated with ZnO nanorods and MWCNTs. The optim...
Shu-Shuai Zhu, M. Shoeb, Fouzia Mashkoor et al.· ACS Applied Materials and In...· 0 citations
A synergistic strategy integrating hierarchically porous structure engineering and barium titanate and BTO nanoparticle (NP) incorporation was developed to enhance the triboelectric performance of PVDF nanofiber membranes and holds promising potential for practical applications in human physiological signal monitoring...
A heterogeneous Janus e-skin enabled by gel-fiber-mediated interlayer adhesion and co-design of materials, structure, and architecture is developed, exhibiting excellent scalable bioinspired multifunctional protection and enabling seamless module integration for electromagnetic shielding and on-demand thermal managemen...
Ke-Fan Fan, Kun Li, Liuwenlin Han et al.· Advances in Materials· 0 citations
Driven by the rapid development of artificial intelligence and the internet of things, flexible piezoelectric polymers and smart sensors have emerged as core research focuses on flexible electronics. Polyvinylidene fluoride (PVDF) and its copolymer P(VDF‐TrFE) stand out for outstanding flexibility, easy fabrication, st...
Duan-Yang Liu, Hao Wu, Chen-Ru Zhao et al.· Physica Status Solidi (a)· 0 citations
Flexible capacitive pressure sensors are in urgent demand for applications such as wearable health monitoring and human–machine interfaces. Porous polydimethylsiloxane (PDMS) is widely used as a dielectric layer but suffers from poorly controlled pore structures and time-consuming fabrication, which limit sensor sens...
Wei-Wei Cui, Jing-Yi Wu, Zhao-Yang Ji et al.· ACS Applied Polymer Material...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.