Sep 2026· ACS Applied Materials and Interfaces· Vol 18, pp. 54006-54020· 0 citations· 45 references
Medicine
Abstract
Solid-state polymer electrolytes (SPEs) suffer from a persistent trade-off between sluggish ion transport and unstable electrode-electrolyte interface. Herein, a synergistic "polymer grafting-inorganic defect" strategy is proposed to simultaneously address both bottlenecks. A low-crystallinity poly(vinylidene fluoride) (PVDF) matrix is first obtained via lithium sulfonate grafting (denoted as PVDF-STFE), which disrupts polymer chain packing and provides additional Li+ hopping sites. Into this matrix, we incorporated gadolinium-doped ceria (GDC) fillers rich in intrinsic oxygen vacancies. These vacancies act as strong Lewis acid sites that perform three coordinated functions: (i) anchoring TFSI- anions to promote salt dissociation, raising the Li+ transference number to 0.84; (ii) further disrupting polymer chain ordering to reduce crystallinity, lowering the activation energy for ion transport; and (iii) homogenizing interfacial Li+ flux to suppress dendritic growth. Control experiments using pristine CeO2, structurally identical but vacancy-deficient, confirm that oxygen vacancies, not mere physical filling, dominate these synergistic effects. The composite electrolyte comprising PVDF-STFE and GDC (denoted as PS-GDC) delivers a high room-temperature ionic conductivity (8.91 × 10-4 S cm-1), a wide electrochemical window over 5.0 V, and enables dendrite-free Li deposition as evidenced by post-cycling scanning electron microscopy (SEM). Quantitative X-ray photoelectron spectroscopy (XPS) reveals the formation of a LiF-enriched (65.11%) and parasitic-poor (24.02% Li-O species) solid electrolyte interphase. Consequently, the assembled LiFePO4||Li cell retains 71.4% of its initial capacity after 400 cycles at 0.5 C and demonstrates stable operation up to 5 C. This work establishes a defect-mediated interfacial paradigm for designing a robust composite SPE.
Solid‐state lithium batteries (SSBs) represent a promising next‐generation energy storage technology, yet the practical application of poly(ethylene oxide) (PEO)‐based solid polymer electrolytes (SPEs) is hindered by limited ionic conductivity and poor oxidative stability at high voltages. In this work, we present a...
S. Bakkardouch, S. Abouricha, N. Sabi et al.· ENERGY & ENVIRONMENTAL M...· 0 citations
Poly(ethylene oxide) (PEO)-based solid polymer electrolytes suffer from low ionic conductivity and limited Na+ transport capability, which restrict their application in solid-state sodium metal batteries. Herein, a Na+-coordinating filler (Al2O3@KHMF) is prepared by grafting organic chains onto the Al2O3 surface thro...
Shu-Wei Wang, Jing-Qun Wen, Fan-Hao Zeng et al.· ACS Applied Energy Materials· 0 citations
Advanced solid polymer electrolytes (SPEs) are indispensable for enabling durable, safe, and high-energy-density solid-state lithium metal batteries (SSLMBs). However, the concurrent optimization of lithium-salt dissociation, Li+ transport, and lithium-metal interfacial chemistry remains a challenge over decades. In th...
Ze-Wen Sun, Xiao-Tong Zhang, Wen-Jie Zhang et al.· Advances in Materials· 0 citations
Li1.3Al0.3Ti1.7(PO4)3 (LATP)-based all-solid-state lithium metal batteries (ASSLMBs) hold exceptional promise for achieving high energy density and excellent safety, yet their practical application is severely hindered by critical interfacial issues, including poor contact, side reactions, and dendrite growth. Herein,...
Jian Liu, Liu Pei, Ying Song et al.· Small· 0 citations
Developing safe and high-energy solid-state lithium metal batteries (LMBs) remains challenging due to the need to simultaneously achieve ultrathin electrolyte membranes, fast ion transport, and mechanical robustness. Herein, we report a scalable 19 μm composite electrolyte based on a porous PTFE scaffold, a PEO/LiTFSI...