Oct 2026· Advances in Materials· pp.
e75460
· 0 citations· 149 references
Medicine
Abstract
Supercapacitors have attracted considerable interest as high-power energy storage devices for grid frequency regulation, backup power systems, and fast-response applications, which are increasingly operated under conditions far from equilibrium, including floating states, high-frequency cycling, rapid charge and discharge, wide temperature windows, and high-voltage regimes. Under these nonequilibrium conditions, performance and stability are governed by coupled kinetic and thermodynamic processes, including ion transport limitations, interfacial polarization, electrolyte decomposition, and structural stress evolution. These processes span multiple length and time scales, from ion desolvation and surface reactions through pore-level transport mismatch to macroscopic degradation. This review presents a unified perspective on the mechanisms that govern supercapacitor behavior under nonequilibrium conditions. Representative operating scenarios are analyzed to identify three common degradation origins, namely, transport mismatch, interfacial instability and thermo-mechanical coupling. Building on this mechanistic understanding, rational material-design principles are derived on ion transport regulation, interfacial chemistry regulation, electrolyte optimization, and structural adaptability. Finally, future research directions are discussed for bridging the gap between laboratory evaluation and real-world operation and for guiding the development of robust supercapacitors for dynamic energy storage applications.
Electrochemical supercapacitors are important energy-storage devices for applications requiring rapid charge-discharge, high power delivery, and long cycle life. However, their relatively low energy density compared with batteries, together with limitations in material stability, electrolyte performance, and manufactur...
Supercapacitors are valued for rapid power delivery and exceptional cycling endurance, yet increasing the energy stored per unit mass or volume remains difficult. The three representative device configurations in this review are electric double-layer capacitors (EDLCs) based on interfacial ion adsorption, pseudo capaci...
Bo-Yuan Zhang· Applied and Computational En...· 0 citations
Low-temperature (LT) operation remains a major barrier to the practical deployment of sodium-ion batteries (SIBs) because reduced thermal activation magnifies coupled limitations in bulk Na+ transport, phase stability, and interfacial kinetics, resulting in strong polarization growth, rapid capacity loss, and poor rate...
Ya-Ping Yan, Jun-Long Sun, Xiao-Hong Shang et al.· Advances in Materials· 0 citations
The practical deployment of high‐specific‐energy lithium metal batteries (LMBs) demands stable operation under conditions of high voltage, fast charging, a wide temperature range, high cathode loading, lean electrolyte, and thin lithium. These conditions intensify the coupling among ion transport, interfacial react...
Zhen Wang, Кэлвин Чэн, Fei Li et al.· Advanced Functional Material...· 0 citations
This study investigates the temperature-dependent electrical behavior of 400 F/2.7 V supercapacitors, both at the single cell level and in packs of six cells connected in series (6S configuration), over the temperature range of −20 °C to 58 °C, for further development of sustainable energy storage systems (ESSs). In th...
Daniela Ioana, I. Bacîș, L. Perișoară et al.· Sustainability· 0 citations
Simultaneous high-voltage (≥4.5 V vs Li+/Li) and fast-charging (≥4C, sub-15 min) operation drives liquid electrolytes into a nonequilibrium state in which cathode reactivity, Li+ redistribution, and interfacial polarization evolve on comparable timescales. The local electrolyte environment established during charging c...