Skip to content
Open access

High-efficiency 660-nm VCSEL exhibiting 26.47% peak wall-plug efficiency and improved high-temperature performance up to 65°C.

Oct 2026 · Optics Express · Vol 34 20, pp. 38655-38666 · 0 citations · 11 references
Medicine

Abstract

We demonstrate a high-performance 660-nm vertical-cavity surface-emitting laser (VCSEL) employing a strain-compensated GaInP/AlGaInP active region and an asymmetric AlGaAs distributed Bragg reflector (DBR). By engineering a -10 nm room-temperature spectral detuning (λgain - λcavity), we compensate for the differential thermal redshift between the gain peak (0.26 nm/K) and the cavity mode (0.035 nm/K). This spectral realignment mitigates the severe Γ-to-X intervalley carrier leakage inherent to the AlGaInP system, sustaining high conversion efficiency at elevated temperatures. The fabricated device achieves a peak wall-plug efficiency (WPE) of 26.47% for 660-nm VCSELs and a continuous-wave output power of 19.11 mW at 300 K. The high efficiency is supported by reduced series resistance via graded DBR interfaces, which enhance thermionic-field emission and mitigate resistive heating. At 340 K, the VCSEL retains a WPE of 11.36% and maintains 40.87% of its room-temperature output power under 15 mA injection. These results demonstrate a robust design strategy for thermally stable red VCSELs in biophotonic and laser-display applications.

Read PDF

Similar papers

Oct 2026

20.8% Peak External Quantum Efficiency of Red (619 nm) InGaN/GaN MicroLEDs

Red-emitting indium gallium nitride (InGaN) micro-light-emitting diodes (μLEDs) remain challenging due to reduced radiative efficiency at the high indium compositions required for long-wavelength emission. Here, we demonstrate InGaN/GaN red μLEDs emitting at 619 nm that are laterally enclosed by an annular distribute...

Roark Chao, Vincent Rienzi, T. Tak et al. · 0 citations
Open access Oct 2026

High-speed 850 and 1060 nm VCSELs with ring-shaped Zn-diffusion apertures for energy-efficient single-mode performance

High-speed vertical-cavity surface-emitting lasers (VCSELs) and their arrays are essential for enhancing bandwidth density while minimizing energy consumption per bit in near-packaged or co-packaged optics (NPO or CPO) modules for modern AI networks. In this paper, we demonstrate that incorporating optimized Zn-diffusi...

Po-Jui Lai, Yu-Hsiang Sung, Jie-Yau Ho et al. · 0 citations
Open access Oct 2026

Design of a 1654 nm InP-Based VCSEL with a Single-Layer MHCG Top Output-Coupling Mirror

Conventional long-wavelength vertical-cavity surface-emitting lasers (VCSELs) require thick distributed Bragg reflectors (DBRs) to provide high-reflectance optical feedback. We present a numerical design of a 1654 nm InP-based VCSEL with a single-layer monolithic high-contrast grating (MHCG) top output-coupling mirror....

Yi-Han Song, Wei Li, Shuo Feng et al. · 0 citations
Open access Oct 2026

High-responsivity and high-output-power MUTC-PD utilizing distributed Bragg reflectors.

We demonstrate a weakly resonant cavity-enhanced modified uni-traveling-carrier photodiode (MUTC-PD) incorporating distributed Bragg reflectors (DBRs), enabling enhanced optical absorption through controlled weak resonance while preserving wide bandwidth to overcome the responsivity-bandwidth trade-off in high-speed ph...

Meng-Jing Xu, Zi-Xuan Cheng, Qian Yu et al. · 0 citations
Conference Open access 2026

Measurement of Optical Properties of Volume Bragg Grating (VBG) for High-Power Diode Laser Stabilization and Tapered Double Clad Fiber (T-DCF) High-Power Amplifier using 976nm VBG LDs

This study investigates the optical properties of volume Bragg gratings (VBGs) for wavelength stabilization of high-power diode lasers. An external cavity incorporating a reflective VBG was implemented, and key parameters such as spectral linewidth, wavelength shift, and output power were experimentally evaluated. The...

Daekyung Kim, Hangeul Kim, Byeongok Kang et al. · 0 citations
Conference Oct 2026

Numerical design of a seven-junction InGaAs/InP laser power converter for high-voltage 1550-nm power-over-fiber

A seven-junction InGaAs/InP laser power converter (LPC) for monochromatic 1550-nm illumination is numerically designed as a high-voltage power-over-fiber source. The monolithic structure employs thickness-graded InGaAs absorbers and p++InGaAs/n++InP tunnel junctions to achieve photocurrent matching and voltage multipli...

Cai-Yi Chang, Xue Xiao, Zhan-Yu Yang · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.