Oct 2026· Advances in Materials· pp.
e75436
· 0 citations· 50 references
Medicine
Abstract
Polyvinylidene fluoride (PVDF) is a highly recalcitrant fluorinated polymer that is highly resistant to chemical degradation, making its sustainable recycling and upcycling challenging. Despite its widespread use as a binder in the lithium-ion battery industry, effective strategies for converting PVDF waste into value-added chemicals remain limited. To resolve this, Fe and Cu dual single atoms incorporated on a new two-dimensional material nanosheets (In2P3S9 NSs/Fe-Cu DSAs) were prepared as photocatalysts for direct raw PVDF plastic conversion to high-value chemicals. The best-performing photocatalyst (Fe1.0Cu0.5) achieves a total acetic/formic acid generation of ∼1351.8 µmol g-1. Various in situ characterizations such as atomic force microscopy-kelvin probe force microscopy, x-ray photoelectron spectroscopy, and electron paramagnetic resonance (EPR) demonstrate superior electron extraction from In2P3S9 NSs to Fe and Cu DSAs, after which the electrons are subsequently scavenged by O2 under ambient conditions. Moreover, quenching experiments as well as in situ infrared spectroscopy, and in situ EPR reveal the vital impact of photoexcited electrons and hydroxyl radicals in PVDF upcycling into high-value products. These findings highlight the significant potential of photocatalysis in transforming one of the most resistant plastic wastes (PVDF) into value-added products, providing a sustainable remedy for plastic pollution crisis.
The development of efficient catalysts for environmental remediation and the conversion of chemical compounds into value-added products remains an important challenge in materials science. Herein, Cu-doped lithium niobate (Li1–xCuxNbO3; 0 ≤ x ≤ 0.025) was synthesized by a modified sol–gel method followed by heat trea...
W. A. G. Pessoa, I. S. Costa Sá, Francisco Marcos Costa Batista et al.· ACS Physical Chemistry Au· 0 citations
Noble-metal-based cocatalysts remain the benchmark for interfacial charge extraction and lowering surface reaction barriers for photocatalytic water splitting, but their scarcity and cost limit scalable deployment. To develop low-cost alternatives, two-dimensional molybdenum monoboride nanosheets (MoB, denoted as MB) w...
Lin Chen, Run-Dong Chen, Lin-Xu He et al.· Journal of Colloid and Inter...· 0 citations
While nanoparticle-based photocatalysts have been widely studied for dye degradation, their tendency to agglomerate in solution and the complexity of recovery methods have limited practical use. Magnetic nanofibers having a large surface area, favourable morphology, and recoverability can be a good alternative. We synt...
Naresh Prajapati, M. Kumar, Poonam Uniyal et al.· Physica Scripta· 0 citations
Traditional Fenton technology encounters significant challenges in efficiently removing pharmaceuticals and personal care products (PPCPs) from water to meet established water purification standards. In this study, a Fe single-atom catalyst (FeSAC/CN-10) with Fe-N/C coordination was synthesized via thermal polymerizati...
Photocatalytic H2O2 production over a semiconductor is contemplated as a sustainable approach. Graphitic carbon nitride (g-C3N4) is recently being extensively explored for H2O2 synthesis owing to its metal free nature, earth abundant, adequate band potential and visible light response. However, its application is pract...
Subhasish Mishra, S. Sourav, S. Sharmila et al.· Nanoscale Advances· 0 citations
In lithium-ion batteries, high-nickel LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes have attracted considerable attention owing to their high energy density. Although conventional poly(vinylidene fluoride) (PVDF) has generally been used as the standard binder, the fluorine (F) in its chemical structure poses severe environme...
Yeonwoo Kang, H. Jeong, Hyunjin Yoon et al.· ACS Applied Energy Materials· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.