Skip to content
Open access

Tailoring electrolyte salt concentration to achieve reversible Li storage in pure-Ni layered oxide

Sep 2026 · npj Energy Materials · Vol 1 · 0 citations · 42 references

Abstract

Modulating electrolyte formulation is an efficient strategy to mitigate side reactions at the electrode/electrolyte interface and thereby enhance the cycling stability of lithium batteries. Herein, the effects of electrolyte salt concentration on the solution structure and interfacial reactivity toward a pure-Ni layered oxide positive electrode are systematically studied using LiN(SO2F)2 (LiFSA)/1,2-dimethoxyethane (DME) model electrolytes. Raman spectroscopy and X-ray total scattering analyses reveal a pronounced structural evolution of the electrolyte solution at high salt concentrations, wherein free DME molecules are nearly absent, and extensive anion coordination to Li⁺ ions becomes prominent beyond 3.5 M. In this regime, coordination by ether oxygen atoms of DME alone becomes insufficient to satisfy the preferred Li⁺ coordination environment, triggering anion participation and the formation of contact ion pairs and ionic aggregates. Electrochemical measurements demonstrate that increasing salt concentration markedly suppresses capacity fading of the pure-Ni layered oxide electrode in the 4.2 V plateau region, with degradation becoming negligible at salt concentrations above 3.5 M. Online electrochemical mass spectrometry further confirms that gas evolution arising from parasitic reactions between the charged pure-Ni layered oxide electrode and ether solvents is effectively suppressed in highly concentrated electrolytes. While the intrinsically high viscosity of concentrated electrolytes remains a challenge for achieving practical rate performance, the present findings elucidate the critical role of electrolyte solution structure in governing electrolyte–electrode reactivity and provide important design principles for electrolytes compatible with pure-Ni layered oxide positive electrodes in advanced lithium batteries.

Read PDF

Similar papers

Oct 2026

Resolving Concentration Dependent Electrochemistry of Ether-Based Electrolytes for Lithium Metal Anodes.

Concentrated ether-based electrolytes are effective in stabilizing lithium metal anodes, yet the molecular origins of the distinct concentration dependences of ionic conductivity, interfacial kinetics, and lithium reversibility remain unclear. Herein, LiFSI/DME electrolytes with varied salt-to-solvent ratios serve as a...

Guo-Qiang He, Chang Liu, Chen-Hui Ning et al. · 0 citations
Oct 2026

Synergistic Ternary Solvent and Mixed Lithium Salts Enable Stable Li Anodes and Long-Life Li–O2 Batteries via Solvation Regulation

The composition of the electrolyte in lithium–oxygen (Li–O2) batteries, including the types and concentrations of lithium salts and the ratio of solvents, plays a decisive role in the nucleation and decomposition pathways of Li2O2, and the stability of the solid electrolyte interphase (SEI) on the lithium metal anode...

Xi-Lin Guo, Hong Sun, Tian-Yu Zhang et al. · 0 citations
Sep 2026

A Synergistic Strategy via Interfacial and Electrolyte Stabilization Enables High-Voltage Ni-Rich Layered Oxide Cathodes.

Lithium-ion batteries (LIBs) employing high-nickel layered oxide cathodes are regarded as highly promising candidates for high energy density. However, operating Ni-rich cathodes at elevated cut-off voltage accelerates electrolyte decomposition and irreversible structural deterioration. To address these obstacles, we d...

Jia-Jia Huang, Jia-He Chen, Hao-Ran Ma et al. · 0 citations
Open access Oct 2026

Rethinking glyme electrolytes in sodium batteries: from passive solvents to active reaction media.

Sodium-based batteries are emerging as promising alternatives to lithium technologies owing to the abundance and low cost of sodium. However, their performance is strongly governed by electrolyte chemistry. This perspective examines the role of glyme-based electrolytes in sodium batteries, with particular emphasis on N...

I. Ruiz de Larramendi, Julen Beitia, E. Goikolea et al. · 0 citations
Nov 2026

Interfacial Anion Activation for Durable Aqueous Zn-Ion Batteries.

Designing a robust solid electrolyte interphase (SEI) is pivotal for stabilizing the Zn anode/electrolyte interface in aqueous Zn-ion batteries (AZIBs). However, the mechanism of SEI formation in AZIBs remains insufficiently understood, particularly when additives induce the formation of mixed inorganic and organic SEI...

Xiao-Sheng Zhang, Eungyeong Lee, Xin Chen et al. · 0 citations
Open access Nov 2026

Enhancement of Electrochemical Performance of Aqueous Zinc-Ion Batteries Using Hydrated Eutectic Electrolytes.

Among various energy storage systems, zinc-ion batteries (ZIBs) have emerged as promising candidates due to their inherent advantages, such as a low redox potential (-0.763 V vs. SHE), high safety, environmental benignity, high theoretical capacity (820 mAh g- 1 or 5855 mAh cm- 3), and low cost. With the rapid developm...

Hui-Qing Fan, Li-Xin Song, Ding-Shuai Hou et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.