Skip to content
Open access

Channel-Aware SINR-Maximizing Spreading Codes

2026 · IEEE Transactions on Communications · Vol 74, pp. 15719-15735 · 0 citations · 28 references

TL;DR

Simulation results consistently demonstrate SINR and BER gains, with up to 60% transmit power savings as compared to traditional codes, and highlight the potential of SINR-driven code design to deliver more reliable and energy-efficient DSSS communication.

Abstract

Direct-sequence spread spectrum (DSSS) is used in many wireless communication systems requiring reliable operation under interference and multipath propagation, including Internet of Things (IoT) networks, telemetry, positioning, and satellite communication systems. It plays a key role in achieving robust, interference-resistant communication. However, its performance is limited in multipath fading channels, since the codes’ statistical properties are affected and conventional code designs remain independent of the channel characteristics. Classical codes such as Walsh, Gold, and Kasami exhibit a decline in signal-to-interference-plus-noise ratio (SINR) under these conditions, resulting in higher error rates. To address this concern, in this study, we propose MaxSINR, a channel-aware code design framework that directly maximizes post-despreading SINR while ensuring fairness across user equipments. Using gradient-based optimization, MaxSINR generates codes that jointly mitigate inter-symbol and multi-user interference. Simulation results consistently demonstrate SINR and BER gains, with up to 60% transmit power savings as compared to traditional codes. These results highlight the potential of SINR-driven code design to deliver more reliable and energy-efficient DSSS communication.

Read PDF

Similar papers

Preprint Oct 2026

Secrecy Performance of an Artificial Noise Aided Dual-Hop SWIPT MIMO-NOMA Network in Presence of Practical Impairments

This paper investigates the secrecy performance of a cooperative non-orthogonal multiple access (NOMA) network under practical impairments. In the considered system, the source employs orthogonal space-time block coding (OSTBC) transmission, legitimate users adopt receive antenna selection (RAS), and the eavesdropper u...

Büşra Demirkol, O. Kucur, G. Karabulut Kurt · 0 citations
Open access Oct 2026

Beamforming-Aided NOMA-OFDM Systems with Successive Interference Cancellation for Enhanced Connectivity

Orthogonal Frequency Division Multiplexing (OFDM) is widely used in wireless communication because of its ability to handle multipath propagation. However, conventional OFDM uses orthogonal resource allocation, which can limit spectral efficiency when multiple users need to share the available resources. This work inve...

S. Akshaya, M. Latha · 0 citations
Open access 2026

BER Analysis of CP-OFDM With BEM-Based Channel Estimation and LMMSE Detection in High-Mobility 6G Channels

This letter investigates the analytical performance of cyclic prefix orthogonal frequency division multiplexing (CP-OFDM) systems over time-frequency doubly-dispersive channels in highly dynamic 6G scenarios. Unlike studies assuming ideal channels, we address the reliability degradation caused by coupled inter-symbol a...

Zi-Qin Yan, Fan Jiang, Zu-Lin Wang et al. · 0 citations
Open access Sep 2026

Performance Analysis of IRS-Aided OTFS Over Generalized Fading Channels

Simulations suggest that  $\kappa-\mu$ provides better BER performance than the other fading channels irrespective of the number of delay values, Doppler values, and modulation scheme.

K. Satyanarayana, H. Bitra · 0 citations
Open access Sep 2026

Maximizing Massive MIMO’s Energy and Spectrum Efficiency via Channel Estimation

This paper investigates the EE–SE trade-off in a downlink Massive MIMO system with Minimum Mean Square Error (MMSE) channel estimation (CE) and different linear combining and precoding techniques, confirming that MMSE-based CE provides higher spectral efficiency than the MR, ZF, RZF, and S-MMSE schemes, albeit at incre...

Raed S. M. Daraghma · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.