Skip to content

Cadmium removal from acidic wastewater using coconut–rice husk‐activated carbon: Adsorption behavior and fluorescence‐assisted monitoring

Oct 2026 · Environmental Progress & Sustainable Energy · 0 citations · 55 references

Abstract

Activated carbon derived from a coconut husk–rice husk composite was investigated for Cd 2+ removal using a laser‐induced fluorescence (LIF) technique. The material was prepared through carbonization followed by chemical activation. It was subsequently characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and Brunauer–Emmett–Teller (BET) analysis. The adsorbent exhibited a porous structure with oxygen‐containing surface functional groups and a BET surface area of approximately 196 m 2 g −1 . Adsorption experiments were conducted under acidic conditions (pH 1–4) with initial Cd 2+ concentrations of 25–75 mg L −1 and adsorbent dosages of 0.2–1.2 g. Rapid Cd 2+ uptake was observed, and selected samples were validated using ICP‐OES to confirm fluorescence measurements. The highest experimental adsorption capacity was 22.5 mg g −1 at an initial concentration of 75 mg L −1 . Adsorption kinetics followed the pseudo‐second‐order model ( R 2  >0.98), while equilibrium data were best described by the Freundlich isotherm ( R 2  ≥0.99, n  = 1.7–2.2, KF = 9.9–19.0). The Langmuir model predicted a theoretical monolayer capacity of 31.76 mg g −1 . The results are relevant to acidic industrial effluents such as electroplating and battery wastewater.

View source

Similar papers

Open access Oct 2026

Binary System Adsorption of Methylene Blue and Congo Red Using Magnetic Activated Carbon

Dye pollution is an environmental concern posing significant risks to human health and water quality, showing the need for effective methods to reduce dye concentrations in contaminated water. Therefore, this study aimed to explore the reduction of dye concentration in a binary system through adsorption using magnetic...

Tarikh Azis Ramadani, Yusron Khoiru Nadhori, N. Mayangsari et al. · 0 citations
Open access Sep 2026

Removal of Zn(II) from low concentration waters by adsorption method with activated carbon obtained from plant waste

Natural adsorbents derived from agricultural waste are considered sustainable and cost-effective solutions for removing heavy metals. This study investigated the adsorbent potential of grape seed waste-derived bioactive carbon (GSW-BAC) for removing zinc(II) ions from water. GSW-BAC was produced by pyrolyzing grape s...

Seyhmus Tumur · 0 citations
Open access Sep 2026

Synthesis and Characterization of Activated Carbon–Zn‐MOF Composite Derived From Waste Tyres for Supercapacitor Applications

A porous carbon material was produced from waste tyres and woody biomass through microwave‐assisted pyrolysis followed by KOH activation. A hybrid AC–Zn‐MOF composite was subsequently prepared by dispersing a solvothermally synthesized Zn‐based metal–organic framework (Zn‐MOF) within the activated‐carbon matrix. St...

M. Sengottian, C. Venkatachalam, Mugaishudeen Gulmohamed et al. · 0 citations
Open access Nov 2026

Structural and Adsorption Properties of ZrO 2 ‐Incorporated Sugarcane Bagasse Biochar for Malachite Green Dye Removal

The primary goal of this research was to synthesize a nanocomposite from a native biomass‐derived material for the effective removal of malachite green (MG) dye from wastewater. The zirconium oxide‐incorporated sugarcane bagasse biochar (ZrO 2 –SBB NCs) nanocomposites were synthesized using an ultrasonication‐ass...

Aditi Surolia, Renu Joshi, Ankit Sharma et al. · 0 citations
Open access Oct 2026

Nickel cobalt sulfide for the efficient adsorptive removal of malachite green dye: A modeling and thermodynamic study

In this study, nickel cobalt sulfide (NiCo 2 S 4 ) was synthesized via a facile co‐precipitation method and evaluated for the adsorptive removal of malachite green (MG) dye from aqueous solutions. The structural and surface properties of the adsorbent were characterized using scanning electron microscopy (SEM),...

Rabia Isikgoz, Birol Işik, Volkan Uğraşkan · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.