Oct 2026· ACS Applied Polymer Materials· Vol 8, pp. 19933-19941· 0 citations· 34 references
Abstract
Polyimide (PI) aerogels with shape memory functionality are highly desirable for thermal insulation in aerospace applications, yet conventional PI aerogels suffer from susceptibility to collapse under compression and insufficient shape recovery at high strain. Herein, we report a series of shape memory polyimide nanofiber aerogels (PINFAs) featuring a lamella-nanofiber cross-linked architecture, fabricated by electrospinning polyamic acid nanofibers (PAANFs) followed by unidirectional freeze-drying and thermal imidization. By systematically tuning the mass ratio of PAANFs to triethylamine (TEA), we precisely regulated the proportion of lamellas to nanofibers in the scaffold. The as-prepared PINFAs with the stable lamella and nanofiber cross-linking structure exhibited low shrinkage (28.2%), high porosity (94.3%), and shape memory performance with a shape recovery ratio of 96.7% and a shape fixity ratio of 98.6% under 50% compressive strain, outperforming previously reported PI aerogels. This work provided a feasible structural engineering strategy for developing high-performance PI aerogels that integrate large-strain shape memory functionality with structural stability, holding significant promise for thermal management in harsh, space-constrained environments, such as aerospace engineering.
The organization of porous materials assembled from nanofibers and nanosheets is difficult to capture with traditional structural parameters optimized for application. Here we show graph models describing the complex structure of porous structure, and the super-elastic aramid nanofibers aerogels are prepared. The wood-...
Additive manufacturing (AM) enables the fabrication of complex, multifunctional structures, while integration with shape memory polymers (SMPs) extends this capability to 4D printing through time-dependent, stimulus-responsive behavior. However, commonly used SMPs like PLA are brittle at room temperature, limiting th...
Sezin Selamoglu, Ali Fallah· Journal of Intelligent Mater...· 0 citations
Elastomers that combine high strength, exceptional toughness, self-healing capability, and scalable processability remain difficult to achieve. Here, we report a leech-inspired cellulosic elastomer constructed from cellulose, diatomite, and polyacrylamide through ethanol-induced structural reconstruction. The resulting...
Electrospun scaffolds with tunable mechanical and biological properties are critical for tissue engineering, where materials must match specific cellular environments. We fabricated poly(l-lactide) (PLLA) fibrous scaffolds incorporating 5 wt % SBA-15 mesoporous silica, controlling fiber morphology through solvent sel...
Martyna Polak, M. Gallo, B. Onida et al.· ACS Applied Nano Materials· 1 citation
Nanofiber aerogels (NFAs) are promising thermal insulation materials for extreme environments; however, simultaneously achieving mechanical robustness, resilience, and low thermal conductivity remains a long-standing challenge in layered NFAs, where interlaminar instability often compromises structural reliability. Her...
Fused deposition modeling (FDM) of shape-memory polylactic acid (PLA) offers opportunities for thermally responsive architectures, but its brittleness limits structural applications. Here, predominantly bio-based PLA/poly(ethylene furanoate) (PEF) blends were developed using a multifunctional epoxy-based chain extend...
Bin Chen, Li-Han Wang, Yi-Tong Wang et al.· ACS Sustainable Chemistry &a...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.