Experimental and Numerical Investigation of Hydrogen Direct Injection in a CI Engine

Abstract

Compression ignition (CI) engines are widely used in the transportation sector due to their high torque and efficiency. However, the current climatic framework limits their application, favouring the adoption of low- and zero-carbon technologies. In this context, hydrogen represents a viable energy source for driving CI engines towards clean combustion. The benefits of hydrogen enrichment in diesel engines have been extensively investigated, particularly in port fuel injection (PFI) configurations. In contrast, the addition of a hydrogen direct injection system within a Common Rail engine remains largely unexplored.In this work, a piezo-actuated outward-opening direct injector fuelled by hydrogen was investigated through a combined experimental and numerical approach. The experimental campaign was conducted on an optically accessible single-cylinder research engine (SCRE), with the injector mounted in the cylinder head. Different injection strategies were explored in terms of duration, while the start of injection (SOI) was fixed at 2° after the inlet valve closure (IVC).In parallel, numerical simulations were performed to analyse the injection process into the engine. Firstly, a zero-dimensional model was developed to provide a preliminary estimation of the pressure within the system during the injection phase. Subsequently, computational fluid dynamics (CFD) simulations were performed to obtain a more detailed prediction of the injection process. The numerical framework reproduced the transient injection phase by modelling the near-nozzle jet development and its interaction with the in-cylinder charge. Based on the combined experimental and numerical results, the effective discharge coefficient of the injector is evaluated under different injection durations, enabling a quantitative assessment of its performance.