Skip to content
Open access

RESULTS AND ANALYSIS OF EXPERIMENTAL STUDIES OF A TWO-SUPPORT NON-CONTACT PNEUMATIC SPINDLE ON ADJUSTABLE CONICAL AEROSTATIC SUPPORTS

2026 · Ukrainian Journal of Mechanical Engineering and Materials Science · Vol 12, pp. 57-66 · 0 citations · 10 references

Abstract

Problem Statement. Non-contact pneumatic spindles supported by aerostatic bearings are widely used in high-precision manufacturing systems because of their low friction, high rotational accuracy, and reduced wear. However, traditional bearing systems have limited adaptability to changing operating conditions and often demonstrate insufficient load-carrying capacity, stiffness, and energy efficiency. Therefore, the development and validation of adjustable conical aerostatic bearing systems that can improve both static and dynamic characteristics remain important engineering problems. Objective. The objective of this study is to experimentally investigate the static and high-speed characteristics of a two-support non-contact pneumatic spindle mounted on adjustable tapered aerostatic bearings, as well as to verify the adequacy of the developed analytical and numerical models. Methodology. A prototype of a pneumatic spindle equipped with adjustable conical aerostatic bearings of various geometries was designed and fabricated. An experimental test bench and methodology for full-scale testing were developed. Statistical methods were applied to process the experimental data and determine the trust intervals for the measured parameters. The load-bearing capacity, stiffness, airflow rate, and high-speed performance characteristics of the spindle were investigated at various supply pressures, bearing clearances, and rotational speeds. The experimental results were compared with analytical calculations and CFD simulations based on the finite element method (FEM). Conclusions. The experimental studies demonstrated a close agreement between the theoretical predictions and measured data. The discrepancy between the theoretical and experimental values of the radial lift force did not exceed 5–7%, whereas the difference for the axial lift force remained within 10%. The results confirmed that adjustable conical aerostatic bearings ensure stable operation over a wide range of operating conditions. An increase in the rotational speed generated an additional aerodynamic lubrication wedge effect, leading to a noticeable increase in the load-carrying capacity. It was found that air consumption increased under load due to pressure redistribution and lubricant overflow in the bearing clearances. Originality. The novelty of this study lies in the development and experimental validation of a pneumatic spindle based on adjustable conical aerostatic bearings with variable geometry, as well as a complex methodology for evaluating their static and dynamic characteristics. This study also confirms the suitability of combined analytical and numerical approaches for predicting bearing characteristics. Practical value. The proposed bearing system allows the spindle characteristics to be adapted to specific operating conditions, reduces compressed air consumption, and increases the efficiency, reliability, and accuracy of noncontact drive systems. Scopes of Further Investigations. Further research should focus on optimizing the bearing geometry, investigating the rotor's dynamic stability at extremely high rotational speeds, and developing advanced control strategies to adaptively adjust bearing clearances under variable load conditions.

Read PDF

Similar papers

Oct 2026

Research on static performances and gas film flow field characteristics of aerostatic bearings with cross-pressure equalizing groove multi-hole integrated restrictors

Aerostatic bearings are widely used in high-precision manufacturing equipment. Increasing the load capacity and load stiffness of aerostatic bearings is the continuing need for the development of high-precision manufacturing equipment. However, improvements in the load capacity and load stiffness of aerostatic bearings...

Yun-Qian Wan, Zhi-Wei Lu, Xi-Yao Liu et al. · 0 citations
Open access Sep 2026

Design, static structural analysis and experimental prototyping of a combined non-pneumatic tire utilizing additive manufacturing

Non-pneumatic tires (NPTs) eliminate the need for internal air pressure and avoid common issues such as puncture or pressure loss. In this work, a hybrid NPT that combines cellular and spoke supports was designed and evaluated. A three-dimensional model of the proposed tire was developed and analyzed by using finite el...

Ahmed Yashar, Ayaz Aydin Abduljabbar, Bilal Mohammed Qasim et al. · 0 citations
Conference Sep 2026

Design of a test system for dynamic load characteristics of radial foil air bearings

To meet the performance-testing requirements of radial foil air bearings with different specifications, a test system enabling rapid shaft replacement was designed and constructed to address the structural complexity, difficulty in shaft replacement, and alignment errors caused by repeated assembly in existing experime...

Yao-Yao Wan, En-Fu Li, Wen-Qiang Su et al. · 0 citations
Open access Oct 2026

Dynamic Support Characteristics of a Conical Hydrostatic Bearing Spindle and Their Effects on Surface Formation in Precision Grinding

The dynamic support characteristics of hydrostatic spindles have an important influence on precision grinding stability and surface quality. However, existing grinding surface-generation models usually prescribe spindle motion as a known input and rarely establish a direct transfer relationship from hydrostatic-bearing...

Rui-Rui Li, Jia-Peng Zhan, Xiang-Bo He et al. · 0 citations
Review Oct 2026

Structural design and multiphysics coupling analysis of aerostatic bearings for ultra-precision and high-stability applications: A review

Aerostatic bearings are key enabling components in ultra-precision and high-stability engineering applications owing to their negligible friction, high motion accuracy, and excellent stability. As advanced manufacturing and precision motion systems move toward nanometer- and subnanometer-level accuracy, traditional pas...

Li Cui, Jiang-Yan Li, Ning Li et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.