A Numerical Study on Resistance and Self-Propulsion Performance Evaluation and Propeller Design Under Wave Conditions for an 1800 TEU Container Vessel

Abstract

The propulsion performance and propeller design of ships have traditionally been evaluated mainly under calm-water conditions. However, under actual sea conditions, waves can increase added resistance, change the stern wake distribution, reduce propulsive efficiency, and affect cavitation behavior. This study evaluates the propulsion performance and designs a propeller for an 1800 TEU container ship under regular wave conditions using computational fluid dynamics. Resistance and self-propulsion simulations are conducted for eleven wavelength ratios in the range of 0.5≤λ/LPP≤2.0, with a fixed wave steepness of H/λ=0.01. The results show that the required power increases significantly in the resonance wavelength range because of the combined effects of added resistance, wake variation, and reduced propulsive efficiency. The Brake Horsepower (BHP) transfer function obtained from the regular wave simulations is combined with representative sea-state spectra using the spectral method to estimate the Daily Fuel Oil Consumption (DFOC) under actual operating sea states. The total long term DFOC is estimated as 37.084 t/day. For the propeller design, the wake distribution at the propeller plane is analyzed at λ/LPP=1.1, as a representative wave condition where the ship motion and propulsion performance variation become significant. The wake analysis shows that the instantaneous inflow changes considerably according to the wave phase, which can affect blade loading and cavitation. Based on this analysis, a new propeller geometry is designed with the cavitation performance as the primary consideration while also improving the propulsion performance. The designed propeller reduces the cavity volume over the selected wave phases and decreases the delivered power by approximately 2.1% in calm water and 3.4% in wave conditions. These results demonstrate the importance of considering wake variation and cavitation characteristics in practical propeller design under actual operating conditions.