Enhancing Hydraulic Turbine Flexibility Through a Modified Radial-Axial Water Jet

Abstract

In industrialized countries, existing regulations generally require the use of renewable energy to the greatest feasible extent. A major difficulty with renewable sources is the inherent fluctuation in their power output due to the main source character. By now, one of the best technologies capable of providing rapid compensation for these fluctuations is hydroelectric power. Hydropower plants, those equipped with hydraulic turbines with fixed blades (e.g., Francis, propeller) are typically designed to operate close to their best efficiency point (BEP) with acceptable load limits in the vicinity due to vibrations and pressure pulsations. Usually, the swirling flow exiting the runner is tailored for peak overall efficiency, which minimizes energy losses in the draft tube cone. When operating away from the design point, draft tube cone losses increase abruptly, and pronounce flow instabilities arise (e.g., vortex rope). This study proposes a new method to control such instabilities that inject a radial-axial water jet into the draft tube cone. Compared with conventional axial water jet injection, the radial-axial jet requires a lower additional flow rate while still effectively suppressing hydraulic instabilities in the draft tube cone. The carried-out analysis was done numerically by using Ansys Fluent 2023 R2. The performed 3D unsteady numerical simulations were carried out to examine the internal flow behavior and evaluate the effect of the radial-axial water jet injection on the unsteady behavior of the flow unsteadiness. Finally, the paper quantifies the relationship between the draft tube pressure fluctuation amplitude and the auxiliary flow rate needed to mitigate these instabilities.