Skip to content
Open access

Fabrication of Two-Dimensional Micropattern Structures through Active Wavefront Control in Laser Interference Lithography

Oct 2026 · Nanomanufacturing and Metrology · Vol 9 · 0 citations · 21 references

Abstract

Laser interference lithography (LIL) is an established technique for fabricating precise and periodic microstructures. The non-orthogonal Lloyd’s mirror interferometer, a type of wavefront division interferometer with a simple structure and short non-common optical paths, offers excellent stability even in ordinary laboratory environments. Additional advantages include facile adjustment of the pitch of the interference fringe without a photomask, and the generation of large-area microstructures in a single step. However, the achievable geometries of the interference pattern are fundamentally limited by the design of the interference field, and the optical configurations or optical parameters must be redesigned to generate different patterns. To address this issue, a novel non-orthogonal two-axis Lloyd’s mirror interferometer employing active wavefront control using a spatial light modulator is proposed herein. The fringe position of the two-axis interference fringe pattern (dot array fringes) is controlled by independently applying dynamic phase modulation to the exposure sub-beams, enabling arbitrary translation of the fringe patterns during exposure. By shifting the positions of the dot array fringes, various micropattern geometries can be fabricated without modifying the optical configuration or optical parameters, while maintaining the advantages of LIL. Numerical calculations demonstrated that the dot array fringes can be translated independently in the X- and Y-directions via phase modulation, where an exposure-dose pattern with non-elliptical arbitrary patterns was generated by controlling the fringe trajectory. Using a constructed prototype optical system, various microstructures were fabricated by controlling the fringe trajectory and were quantitatively evaluated using scanning electron microscopy and atomic force microscopy. The fabricated geometrical parameters showed fair agreement with the corresponding simulated results, confirming the feasibility of the proposed method. A method of moving light spots generated by laser interference lithography (LIL) is proposed and verified through numerical calculations. A two-axis non-orthogonal Lloyd’s mirror interferometer with a spatial light modulator (SLM) is designed, constructed and used to generate a dot array fringe, which is successfully shifted in the X- and Y-directions by controlling the signals given to the SLM. Exposure experiments while moving the dot array fringes demonstrate the feasibility of the light spot moving exposure method for generating diverse micrometric patterns. A method of moving light spots generated by laser interference lithography (LIL) is proposed and verified through numerical calculations. A two-axis non-orthogonal Lloyd’s mirror interferometer with a spatial light modulator (SLM) is designed, constructed and used to generate a dot array fringe, which is successfully shifted in the X- and Y-directions by controlling the signals given to the SLM. Exposure experiments while moving the dot array fringes demonstrate the feasibility of the light spot moving exposure method for generating diverse micrometric patterns.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.