Experimental Study on Vertical Bearing Characteristics of Prestressed High-Strength Concrete Pipe Pile-Group Foundations

Abstract

To address the difficulty in accurately evaluating the vertical bearing behavior of prestressed high-strength concrete (PHC) pipe pile-group foundations, this study investigated three single piles and an eight-pile group with a Wang-shaped irregular pile cap through field static loading tests and theoretical analysis. The measured ultimate bearing capacities of single piles D1/D2 and D3 were 7040 and 3000 kN, respectively. For the pile-group foundation, the ultimate bearing state was not reached under the maximum applied load of 15,000 kN, at which the settlement was only 3.52 mm. The pile-head load distribution followed the order corner piles > side piles > inner piles, with corresponding load proportions of approximately 13.9%, 12.9%, and 9.4%. The calibrated API and hyperbolic models predicted the single-pile bearing capacities with errors ranging from 0.23% to 3.40%. The API model better represented the steep-drop portion of the Q-s curve, whereas the hyperbolic model more accurately predicted the initial stiffness and low-load response. For pile-group foundations, the combined equivalent-pier and load-transfer method showed good applicability. The main contribution of this study is to provide field evidence for the vertical bearing and load-transfer behavior of a large-diameter PHC pipe pile group with a Wang-shaped irregular pile cap, extending existing studies that have mainly focused on single piles or conventional symmetric pile groups. The results also provide a quantitative basis for the analysis and design of PHC pipe pile-group foundations in highway bridge engineering.