Lithium-rich manganese-based layered oxides (LROs) offer high theoretical capacity but are limited by irreversible oxygen redox, voltage fade, and structural degradation upon cycling. Herein, we develop a dual-interface engineering strategy for LRO cathodes, integrating a catalytic-shielded carbon coating and interface-confined discrete spinel domains. The carbon layer decouples electrolyte decomposition from lattice-driven catalysis, suppressing cathode-electrolyte interphase growth and oxygen release, while subsurface-confined spinel phases establish three-dimensional Li+ transport pathways and mitigate lattice strain. Ex-situ hard/soft X-ray absorption spectroscopy confirm enhanced anionic redox reversibility and stable charge compensation. Consequently, the optimized LRO achieves an initial Coulombic efficiency (ICE) of 93.1% with a discharge capacity of 295 mAh g−1 at 0.1 C, compared with 267 mAh g−1 and 79.0% for the pristine counterpart. It maintains 88.9% capacity after 150 cycles at 4.99 V (vs. 29.4% for pristine after 80 cycles) and 79.2% after 200 cycles at 45°C. Remarkably, a 1.58 Ah Si/C||HV-LRO pouch cell delivers 307 Wh kg−1 energy density and retains 70.7% capacity after 100 cycles at 0.8 C, demonstrating practical viability for high-energy applications. This work establishes a paradigm for stabilizing high-voltage LRO cathodes through spatially decoupled interfacial catalysis and reinforcement.
Li-rich Mn-based layered oxides (LRMOs) are promising high-energy cathodes for all-solid-state batteries (ASSBs), but their application is limited by irreversible O2 evolution during lattice O2−/O22− redox and interfacial degradation at high voltages. Here we report a “coat–sinter–wash” synthetic strategy that simultan...
Jia-Chen Ying, Gao-Hong Liu, Bing-Liang Wang et al.· Science Advances· 0 citations
Anionic redox reactions (ARRs) in ultrahigh-nickel layered oxides provide additional capacity for high-energy lithium-ion batteries, yet irreversible oxygen charge compensation at high voltage remains a critical challenge. Herein, a tungsten (W)-doping strategy is developed in LiNi0.9Co0.05Mn0.05O2 (NCM90) to regulat...
Qin-Lin Lu, Yue Zhang, Bing Liu et al.· ACS Sustainable Chemistry &a...· 0 citations
High-voltage cathodes with hybrid anion and cation redox activities, such as Li-rich and Mn-rich oxides, offer a pathway to higher energy density in lithium-ion batteries (LIBs). However, those cathodes suffer from oxygen loss from both the surface and grain boundaries, especially in traditional polycrystalline cathode...
Lithium-rich manganese-based oxides (LRMOs) exhibit exceptional specific capacity owing to their unique combination of cationic and anionic redox activities, rendering them widely recognized as one of the most promising cathode materials for high-energy-density lithium-ion batteries. However, their cycling stability is...
Layered potassium manganese oxides (KMO) offer a theoretically high energy density but intrinsically suffer from insufficient structural stability driven by Jahn–Teller lattice distortion. Herein, we report a spatially distributed pillaring structure that enables synergistic bulk-surface optimization via exogenous pill...
Xin-Yao Chang, Yi-Han Yang, Jie Chen et al.· Applied Physics Letters· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.