The morphology of molybdenum disulfide (MoS2) plays a key role in its catalytic performance, as active sites are associated with the edges of its layered structure. Transmission electron microscopy (TEM) is widely used to characterize MoS2 catalysts, but manual image analysis is time-consuming and operator-dependent. Here, a deep-learning-assisted workflow combines YOLO instance segmentation of individual slabs, automatic scale calibration, particle grouping and interactive correction to extract morphological parameters. YOLO26s was selected as a practical compromise between segmentation quality and model complexity following comparison with YOLO26n and YOLO26m. Agreement was evaluated using expert-reviewed slab lengths from one held-out image and independent manual morphological measurements by two experts on five additional images. For 720 paired slab lengths, the mean difference was +0.09 nm and the root-mean-square error was 0.26 nm; these values describe agreement within a single image and with a reference obtained by reviewing the model masks. The workflow supports quantitative analysis of the investigated MoS2 images, while broader validation across specimens and imaging conditions remains necessary.
Accurate quantification of microspheres and pores in Scanning Electron Microscopy (SEM) images is an important subject in fields such as materials science and biomedicine. Traditional image processing methods suffer from low efficiency, poor robustness, and difficulty in handling overlapping targets and complex morphol...
Yuan-Shih Cheng, En-Ze Cui, Tao Yu· The International Conference...· 0 citations
The growth and morphological evolution of CO2 hydrates in marine sediments are recognized as highly significant for hydrate-based CO2 sequestration (HBCS). However, it remains challenging for their pore-scale processes to be directly characterized via macroscopic parameters. To ensure that issues such as weak boundar...
Chen-Yi Zhang, Chao-Zheng Ma, Ting-Ting Luo et al.· Energy & Fuels· 0 citations
Over the past several years, scanning electron microscopy (SEM) based automated acquisition workflows have been widely used in semiconductor analysis to rapidly inspect fine patterns and defects in advanced memory and non-memory devices. In particular, during repetitive high-magnification imaging across multilayer st...
YoungChan Choi, W. Kwon, Christopher H. Kang· International Symposium for...· 0 citations
Three-dimensional (3D) chemical characterization at the transistor level is increasingly required for root-cause failure analysis (FA) of advanced semiconductor devices, whose yield-limiting defects are intrinsically volumetric. Multimodal electron tomography combining high-angle annular dark-field (HAADF) scanning/t...
A. Kadu, Maadhav Kothari, Malvika P. Prasad et al.· International Symposium for...· 0 citations
Under a leakage-safe, statistically validated protocol, texture descriptors recover a hydrogen-charging signature from SEM micrographs even with few samples, and the same protocol can be extended to larger HE detection studies in other alloy systems.
Muhammad Awais, Muhammad Yaseen, Abdul Shakoor et al.· arXiv.org· 0 citations
Lead halide perovskite solar cells have emerged as promising candidates for next-generation photovoltaics; nevertheless, fabrication of the perovskite photoactive layer remains highly intricate with film formation strongly modulated by various processing and environmental factors. Here, we report an environment-control...