Skip to content
Open access

Analysis of Seismic Demand in Different Structural Members by Considering Various Earthquake Zones

2026 · Journal of Ballistics · 0 citations · 12 references

Abstract

This paper presents a comparative analytical investigation of seismic demand in reinforced-concrete (RC) structural members located in the four Indian earthquake zones (II, III, IV and V). A regular twelve-storey, four-bay special moment-resisting RC frame was used as a reference structure. Seismic action was evaluated using the zone factors specified for Indian seismic zoning, while lateral loads were distributed along the height and applied to a linear elastic plane-frame finite-element model. The study focuses not only on global response parameters such as design base shear, roof displacement and inter-storey drift, but also on local member demands including beam shear and bending moment, column shear, column bending moment and earthquake-induced column axial force. The computed design base shear increased from 705.31 kN in Zone II to 2539.12 kN in Zone V. Correspondingly, roof displacement increased from 16.64 mm to 59.92 mm, and the maximum inter-storey drift ratio rose from 0.00057 to 0.00205. Peak beam moment increased from 69.94 to 251.80 kN-m, whereas peak column moment increased from 91.31 to 328.71 kN-m. The findings demonstrate a nearly proportional amplification of seismic member forces with the seismic zone factor in the elastic range. Columns experience particularly strong amplification of axial, shear and flexural demand, emphasizing the need for ductile detailing and zone-specific member design in high-seismic regions.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.