Imp-ACT is presented, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction.
Abstract
Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.
Teleoperation is widely used to collect high-quality demonstrations for robot learning. Dexterous manipulation, however, requires coordinated control of motion and contact forces. Operators can specify motion, but struggle to reproduce the subtle force adjustments of human manipulation without feeling the robot's conta...
Ying Yuan, David Held, Jitendra Malik et al.· 1 citation
During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems comm...
Wrist deformation provides useful cues about local contact constraints, and the gains observed with larger demonstration sets suggest that these cues help policies use demonstrated contact experience more effectively.
Vision-language-action models tell a robot where to move, but not how hard to push. Contact-rich tasks depend on that second quantity, compliance, yet no widely used demonstration interface records it. The obstacle is identifiability as realized pose and measured force cannot separate the operator's intended equilibriu...
Contact-rich dexterous manipulation requires policies that translate physical feedback into motion commands while regulating interaction loads across evolving multi-contact interactions. This requires haptic observations of contact state and action supervision showing how commands should adapt. Existing policies often...
Nai-Sheng Ye, Yin-Zhe Zhou, Jun-Kai Zhao et al.· 0 citations
Contact-rich manipulation, requiring robots to regulate not only motion but also how they yield to external forces, has emerged as the next frontier for Vision-Language-Action (VLA) models. However, existing VLAs output purely kinematic commands, degrading performance on real-world contact-rich tasks. In this paper, we...
Jongmin Kim, Junsu Ha, Che-Sang Park et al.· 1 citation
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.