Oct 2026· Advanced Functional Materials· 0 citations· 31 references
Abstract
Thermal rectification is critically essential for flexible electronics, wearable devices and intelligent thermal management. However, state‐of‐the‐art thermal diodes are severely restricted by insufficient mechanical conformability or limited rectification efficiency. Herein, we propose a flexible convective thermal diode (FCTD) constructed from aramid aerogel‐hydrogel heterostructures with asymmetric wettability. The positive terminal adopts polyvinyl alcohol/lithium chloride modified hygroscopic aramid hydrogel. Before encapsulation, it absorbs ambient moisture and then serves as a sealed internal water reservoir during operation. The negative terminal employs channelized hydrophobic aramid aerogel, which simultaneously realizes low thermal conductivity and ultralow‐adhesion vapor/condensate transport. This asymmetric wetting architecture establishes efficient evaporation‐condensation convection and high heat flux in the forward mode, while suppressing heat conduction in the reverse mode. The optimized FCTD achieves an exceptional thermal rectification ratio of 11.49 ± 0.35 under identical forward and reverse surface temperature boundaries of 90°C and 20°C, with a bending radius of 4.2 mm and stable rectification over 50 cycles. Numerical simulations further reveal the intrinsic asymmetric heat and mass transfer mechanism. This work provides a structural strategy for high‐performance flexible thermal diodes, and offers feasible guidance for the design of next‐generation intelligent thermal management systems.
The rapid development of wearable electronics places higher demands on materials with mechanical flexibility, sustainable energy supply, and thermal management. However, incorporating conductive fillers such as liquid metal (LM) into soft porous materials may introduce additional heat‐transfer pathways and complica...
Qiang Liu, Yin Yan, Ming-Guo Ma et al.· Advanced Functional Material...· 0 citations
Thermal protection in high-temperature environments urgently demands ceramic aerogels that combine mechanical flexibility with low thermal conductivity. However, due to the heat transfer mechanism dominated by thermal radiation, conventional materials exhibit a sharp increase in thermal conductivity above 800 °C, which...
Xin Long, Min Hu, Jia-Nan Qin et al.· Journal of Physics, Conferen...· 0 citations
The heat stress associated with extreme weather has paved the way for the rapid development of passive cooling techniques, but they are unable to tolerate fluctuating thermal and hydric environments, and their cooling power is more than halved under harsh conditions. Reliable multimodal thermal management techniques...
Na Zhang, Richu Luo, Lei Zeng et al.· Advanced Functional Material...· 0 citations
Adaptive passive cooling offers an energy-efficient approach to thermal management by dynamically responding to changes in solar irradiation, temperature, and humidity without external power input. However, existing adaptive thermoregulation materials remain limited by structural-mechanical mismatches in rigid multilay...
Qin Ye, Yi-Mou Huang, Shuai Guo et al.· Proceedings of the National...· 0 citations
ABSTRACT Aramid dielectric papers are indispensable for insulation in high‐performance motors for electric vehicles, aircraft, and high‐speed rail. However, the ongoing electrification trend toward higher voltage, frequency, and power density imposes severe electrothermal stresses that conventional aramid papers cannot...
Jun-Wen Ren, Jun-Xue Chen, Yi Tong et al.· Advancement of science· 0 citations
Silicon carbide (SiC) aerogels are attractive protective materials for extreme environments owing to their low density, thermal stability, thermal insulation, and electromagnetic wave attenuation. However, conventional SiC aerogels assembled from rigid nanoparticle-chain skeletons are intrinsically brittle and lack rev...
Ming-Yuan Yan, Shi-Bin Nie, Jing-Wen Wang et al.· Small· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.