Sep 2026· Journal of Environmental Engineering and Science· pp. 1-9· 0 citations· 21 references
Abstract
This study demonstrates a novel, low-temperature coupled chemical-physical activation strategy to valorise carbon (AC) featuring a mixed micro-mesoporous architecture. The synthesis utilises an optimised two-step process: initial chemical activation with concentrated sulfuric acid (H2SO4) followed by low-energy argon-atmosphere pyrolysis at 500°C. Comprehensive material characterisation was conducted by way of proximate analysis, thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy. The optimised biomass-derived AC exhibited a high char yield of 47.3%, an enhanced elemental carbon content of 70.6%, a moisture content of 4.31%, and an ash content of 6.08%. Gas adsorption diagnostics revealed a functional Brunauer–Emmett–Teller specific surface area of 241.91 m2/g (Langmuir surface area of 361.41 m2/g). Notably, an average pore diameter of 32.42 Å confirms a prominent mesoporous volume fraction well-suited for targeting macromolecular adsorbates. Liquid-phase batch adsorption assays further validated the practical utility of the material, showing rapid initial kinetics for organic dye removal. This approach offers a sustainable, cost-effective framework for agricultural waste valorisation while producing tailored porous matrices for environmental engineering applications.
Carbon nanofibers (CNFs) are a fascinating class of carbon nanomaterials with unique properties and a wide range of applications. CNFs obtained using plant-based oil (Ricinus communis L.)as a sustainable carbon precursor via the Oil Vapor chemical vapor deposition (OV-CVD) method. Iron-based catalysts were placed in a...
Yogesh Kajale· Natural Resources for Human...· 0 citations
Water hyacinth (Eichhornia crassipes) is an aquatic biomass with high potential as a precursor for activated carbon production due to its considerable lignocellulosic content. This study aimed to synthesize activated carbon from water hyacinth through chemical activation using Potassium Hydroxide assisted by ultrasonic...
Renata Ramadhani Inggacevani, Suprihatin, Almas Ariani Ratu Soraya et al.· AJARCDE | Asian Journal of A...· 0 citations
The valorization of sugarcane bagasse ash (SCBA) as a secondary silica resource was investigated using sequential thermochemical and hydrothermal treatments. SCBA was calcined at 500–800°C and subsequently treated with 1–3 M NaOH to identify suitable processing conditions within the investigated range. Structural,...
This study introduces a sustainable plant-mediated strategy for preparing electrochemically active α-MoO₃ nanostructures using Endostemon viscosus leaf extract and evaluates their potential as supercapacitor electrode materials. The aqueous leaf extract was prepared from 10 g of dried leaves in 100 mL of distilled wate...
K. Moorthy, B. S, A. Balasubramanian et al.· Journal of Environmental Nan...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.